im thinking of building my truck to put in some local sledpulls nothing HUGE but what turbo should i upgrade to? dont know if i have enough $$$ to go twins but this truck has to be streetable because i drive 60 miles a day to work and back in it getting ready to go goerend TC, VB, kolene steels red eagle clutches hardened shafts (do i need all three or is there a considerably weaker one that needs replaced) also is there anyone here pulling with a 6" lift? if so hows that working for ya?

 

come on i know there are a few guys on here pulling with these trucks. pourin diesel surely you have some input?

 

I think you should re-post this in the Competition sectionl. I'm sure those guys could help...

Good luck and try not to break too much stuff...

 

go big or go home.

 

Yeah, and get rid of the 6" lift, or it will get rid of a few other things for ya!!!
(U-joints, driveshafts, axles, etc....)

 

any turbo suggestions? i want one that will still spool quick for the street but also do good with a sled behind the truck

 

ats's aurora 5K or their smaller aurora turbo. Theirs also some fairly priced twins out thier.

 

HTT has a new pro street 66 its suposed to be bad

 

I would like to here any more info on this Pro Street 66.

 

Its basically the same charger as a SPS66.....66mm comp wheel, 70-71mm turbine wheel @ the exducer.

 

Pro street will be a bit big for spooling driving the truck as a daily driver but she'll definitely make the power.

 

From what I here it is going to be a good setup for sled pulling and ok street manors.