quick question about rail preassure. Useing predator.
Thread Starter
Registered User
Joined: May 2007
Posts: 160
Likes: 0
From: FL
quick question about rail preassure. Useing predator.
monitoring the hpcr Press with the predator, was wondering if rail preassure should ramp up slowly with rpm or go to max and stay there.
Right now I am seeing about 120 (17,400 psi) at 2k and it ramps up to 160 (23,200 psi) at 3k.
Very little smoke on performance non stacked tune, no puck installed. So just wondering if this is normal or if something is up. Thanks all.
Right now I am seeing about 120 (17,400 psi) at 2k and it ramps up to 160 (23,200 psi) at 3k.
Very little smoke on performance non stacked tune, no puck installed. So just wondering if this is normal or if something is up. Thanks all.
Thread
Thread Starter
Forum
Replies
Last Post
tristan21
3rd Gen High Performance and Accessories (5.9L Only)
26
Apr 22, 2008 12:41 PM
Mark03Ram
3rd Gen High Performance and Accessories (5.9L Only)
18
Aug 24, 2007 11:30 AM
tristan21
3rd Gen High Performance and Accessories (5.9L Only)
2
Jan 17, 2007 05:51 PM
cLAYH
Performance and Accessories 2nd gen only
3
Jan 15, 2007 11:06 PM