Question about install for Juice w/Attitude

Reply Subscribe

Thread Tools

Search this Thread

Apr 16, 2007 | 05:48 PM

05CTDN8

Thread Starter

Registered User

Joined: Apr 2006

Posts: 1,368

Likes: 0

From: F-ville NC

Question about install for Juice w/Attitude

I currently have analog gauges. Can I tap the analog pyro with the pyro for the attitude? I really dont like the idea of running 2 probes in my stock intake....

Apr 16, 2007 | 06:38 PM

Luvnacumns

Banned

Joined: Dec 2005

Posts: 5,194

Likes: 0

From: Twin Falls, Idaho

Quote:

Originally Posted by ShakinRedCTD

I currently have analog gauges. Can I tap the analog pyro with the pyro for the attitude? I really dont like the idea of running 2 probes in my stock intake....

I seem to remember this being asked before and the consensus was no. But don't hold me to that.. Do a little searching..

Shane

Apr 16, 2007 | 07:11 PM

skynyrd

Registered User

Joined: Oct 2006

Posts: 1,641

Likes: 0

From: Harpers Ferry WV

this was brought up before and there is a thread about this and i believe it was due to the low voltage of the thermocouple you get false reading when you try to run two gauges off the same thermocouple.

Apr 16, 2007 | 07:29 PM

madhat

Administrator/Jarhead

Joined: Jun 2006

Posts: 14,999

Likes: 33

From: Jonesborough, TN

I'm running one, and I am not having problems. I ran them seperate for a while, seemed to have the same numbers. I have a amplifier for my guages, tho. They both have their own power source.

Apr 16, 2007 | 08:05 PM

Pull U 2

Guest

Posts: n/a

I ran both off the same probe for awhile just to see if it can be done and I didn't have any problems. I don't remember if there was any temp difference between the two. I don't think there was but I really don't remember.