Anyone running the 6005's ? I have seen a truck with 20's on it that looked sharp. Only issue is the back spacing. 17" is 4.75, 18" 5 and 20" is 5.25.

 

What do you mean by the issue being the backspacing? You looking for more or less backspacing . . . and what size wheels? I looked at ProComps when buying mine but ended up with Eagles. Can't remember the exact backspacing, but it's somewhere in the neighborhood of 4.5" with 35" tires and only rubs it bit near full lock.

Thomas

 

From what I have been told you want 5.5 6" of BS. Wheel sizes are above and width is 9.5" on all that I was looking in case i wanted to put some wider tires on in the future.

 

The closer you get to 5.5" the better off you'll be . . . I was just saying that it's really not a problem unless you don't want ANY rubbing at all. It took me about a week to get used to my 20"s and 35"s with 4.5" of BS. Those 18"s or 20"s will probably be pretty close. I know a lot of guys like the H2 wheels because they've got good specs for our trucks - I just never particularly care for the looks of them myself.

Thomas

 

I just put these on about a month ago. 5.25" backspace

 

Silverram, that is the exact wheel and tire i was wanting to get. any problems with rubbing? Got any more pics, side shots etc ?

 

They don't rub at all but I have a 2" leveling kit. If you don't have a leveling kit it would be really close.

 

I've got a Kore leveling kit in the garage ready to be installed.

 

How far do the stick out past teh fender?

 

The tires are about dead even with the edge of my flares. I would take a side shot picture but my defrost blend door went AWOL to the tune of $800.00. So needless to say I don't have my truck right now. It should be back tomorrow though.

 

mine are 20x10 with 5.5" backspacing and NO rubbing issues. 39.5x13.5x20 IROKS.