I am getting ready to order my stacks and am having a hard time decideing on what size to get. Can someone show pics of 5, 6, and 7" mitre's. I can get the whole system for under 450 everyday so I just need to make a decision.

 

Here's mine, it's a 2WD and i have my tips rotated, but they are 6 in. mitres.

 

6" mitres here...

 

stacked, your pics won't come up or am I the only 1 that can't see them?

 

Not sure, they seem to be working for me.

http://img211.imageshack.us/img211/8...wangle2qa2.jpg

http://img266.imageshack.us/img266/2044/stacks10sd0.jpg

Try copy/pasting the link?
Not sure other than that...

 

might be because I am at work and they are spying on me!!!

 

If you have websense or any other firewall/blocker software at work it might be blocking the pics.
Maybe someone abused the ole policies there and got caught looking at some **** or something

 

was not me!!!

 

hears mine 5" no muff.just cat.

 

I like the rear shots to see how they look. I am thinking 6" for now. Any one else have some rear pics of stacks? Also does the size matter to much with the noise level, and does a muff nedd to be put in to tone the sharp noises?

 

If you pull alot of trailers, you may find yourself wanting a muffler. I can handle the drone in mine, but the drone can be a little much. You main drone level is at 2000-2300rpm, so if you drive in that range constantly, you will be in the drone level.

 

Yep, same here.

I dont pull many trailers though, and when I do, they arent usually too heavy.

I can stand the drone though, ive had loud cars ever since I started driving


If the drone bothers you, sound deadener helps quite a bit, I put some in my truck, and I just need to finish up the roof/front floor to complete it, its helped alot with resonance at certain rpms/load, where you get that constant drone for a few hundred rpms...

Like rip said, if you tow alot, or dont like the noise, a muffler will help you quite a bit. Just try it with no muffler, if its too loud add one to it, its easier to cut out some pipe and add it, then to use a muffler first, cut it off, replace with straight pipe, then decide its too loud again and put the muffler back on it

Im running no muffler, with 6" mitres and I think it sounds great. Id go with 6"ers just because IMO, 5" are too small, and 7" are a little overkill(and expensive), if I had the money though, id probably have 7"ers, I like bigger/better

Heres a little vid at idle, ill get a better one eventually

 

https://www.dieseltruckresource.com/...d.php?t=154887 here is mine

 

I have 5s on it with no muffler got the air tank where the muff use to be but I also have a 4" y under there and so im going 4" into 8" into 10 inches worth of pipe sounds load when im going through the gears but at hwy speed it is not bad at all and when the tunes are playing dont even notice it.

 

Thanks for the info and pics/ videos.