Who's running the Mag front diff pan and an after market steering stabilizer? Any rubbing issues?
What about a Thuren track bar? Any rubbing?
Rick

 

you'll only be able to use a single stabilizer in the stock location. Dual's won't work with the cover.

Thuren's track bar is no differently shaped than a stock bar, there's no problem there.

 

I installed both front and rear mag hytec covers for my 07 with no problems with the stabalizer.

 

Is this with an aftermarket stabilizer?
I know I'll be ok with Carli's / Defiant's single stabilizer because it uses the same mounting hole. But, with Thurens's and Kore's Mount I think it might hit.

 

The drag link mount in Don's kit can be rotated such that the damper shaft can be pushed away from the pumpkin cover. And the mount itself only protrudes about 1/2" out from the drag link itself. I'm pretty sure Don's stabilizer will work.