Injectors, turbo's, & clutches
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: Bethpage, Tn
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
Injectors, turbo's, & clutches
Got a friend of a friend with a lot of $$ to burn. Truck is an '03 6spd that already has a Bully Dog programer.
Guy wants a set of Injectors for sure, who has them/makes them?
He's going to need a clutch for sure, will a 13" SBC OFE hold BD programer & injectors?
Also would a HTT Killer B2 64/14 be a good turbo for this setup?
Guy wants a set of Injectors for sure, who has them/makes them?
He's going to need a clutch for sure, will a 13" SBC OFE hold BD programer & injectors?
Also would a HTT Killer B2 64/14 be a good turbo for this setup?
#3
Registered User
Thread Starter
Join Date: Dec 2002
Location: Bethpage, Tn
Posts: 706
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by big red psd cc
If he's going turbo and injectors, I would be looking at the Fe Clutch, rather then the OFe. He would be almost at the max point of the OFe.
#4
Registered User
Join Date: Mar 2003
Location: the shop
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
sell the downloader for him and spend that money towards a tst
then he wont need to spend a bunch of money on injectors. He could spend the money saved on a turbo and clutch
Im very happy with my PS 62
Ive heard it said that injectors are a last resort for some 3rd gen trucks
tst plus a pressure box and a lot air =
then he wont need to spend a bunch of money on injectors. He could spend the money saved on a turbo and clutch
Im very happy with my PS 62
Ive heard it said that injectors are a last resort for some 3rd gen trucks
tst plus a pressure box and a lot air =
Thread
Thread Starter
Forum
Replies
Last Post
justagoodolboy
1st Gen. Ram - All Topics
11
07-11-2006 06:00 PM