3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Injectors again!

Old Feb 17, 2007 | 06:45 AM
  #1  
RyeThomas's Avatar
Thread Starter
Winner winner chicken dinner!
 
Joined: Aug 2006
Posts: 1,613
Likes: 11
From: Northern VA
Injectors again!

My truck is such a woman. It recently has started to smoke (white) like crazy at every start up and has a intermitent ruff idle. I Just when I thought I was done, or at least thought it was time to start working for dual cp3s its back to the drawing board. Its crazy out of no where she will start to idle ruff and throw white smoke, at other times she runs ok. When shes warmed up she runs great, but will still ruff idle whenever.It must be an electrical issue with an injector, it would be almost impossible to dignose which one. SO I convinced the warden, and my saved money is going to cummins for 6 new injectors. Me and Tim will change the tips, or send them to Don. And I should be good for a very long time. I swear my truck was built on a friday and I just dont have the patience. But my Flux 3's on brabd new sticks, look out shes gonna roll!!
Reply
Old Feb 17, 2007 | 07:29 AM
  #2  
dieselfan's Avatar
Registered User
 
Joined: Jun 2006
Posts: 1,367
Likes: 0
From: Lake Charles,Louisiana
Didnt you say you were not running any pressure? what would cause those flux 3's to fail? warranty? that sucks!
Reply
Old Feb 17, 2007 | 07:44 AM
  #3  
wap's Avatar
wap
Registered User
 
Joined: Aug 2005
Posts: 3,563
Likes: 1
From: Ga.
Why new injectors? I thought Don could fix up your old ones.
Reply
Old Feb 17, 2007 | 08:23 AM
  #4  
RyeThomas's Avatar
Thread Starter
Winner winner chicken dinner!
 
Joined: Aug 2006
Posts: 1,613
Likes: 11
From: Northern VA
If it were mechanical Don could and would fix them no question, but due to the fact it comes and goes it is electrical and a major P.I.A. The injectors were in a bad installers hands and had not so great performance tips before Don ever got them, and he did alot of extra work to straighten them out. But now I truly believe its an electrical gremlin and would be very hard to pin point which one injector it is. But hey an extra set of sticks is a great thing to have. Trust me I have nothing but great things to say about Don, and Tim and if it were something that could be fixed it would be done no question. And I could be patient and buy 1 stick and switch one out at a time untill I found the bad one, but patience is not one of my virtues. So I think I will buy 6 new ones and be done and not have to worry again, and try to talk Don into making my 3's a little bigger .
Reply
Old Feb 17, 2007 | 08:25 AM
  #5  
dieselfan's Avatar
Registered User
 
Joined: Jun 2006
Posts: 1,367
Likes: 0
From: Lake Charles,Louisiana
you could do 3.3's or maybe some 4.2's.
Reply
Old Feb 17, 2007 | 08:31 AM
  #6  
RyeThomas's Avatar
Thread Starter
Winner winner chicken dinner!
 
Joined: Aug 2006
Posts: 1,613
Likes: 11
From: Northern VA
Originally Posted by dieselfan
you could do 3.3's or maybe some 4.2's.


The only problem I have is i have to tow for work from time to time, but I swear my 3's run as cool as stock, its crazy. I still need to hook up to a heavy trailer and see how warm my 3's get, but its winter time and I dont have any work .
Reply
Old Feb 17, 2007 | 09:28 AM
  #7  
Timinva's Avatar
DTR Advertiser
 
Joined: Sep 2002
Posts: 741
Likes: 0
From: Va Beach,Va
Ryan dont order anything till Monday. I will be out of town till then, give me a call Monday. New injector prices will give you a stroke, Tim
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Steven K
3rd Gen Engine and Drivetrain -> 2007 and up
4
Jun 4, 2009 10:32 AM
KRB
1st Gen. Ram - All Topics
30
May 20, 2007 06:20 PM
b84u
12 Valve Engine and Drivetrain
7
Feb 20, 2006 01:04 PM
BIGOKIE
1st Gen. Ram - All Topics
5
Jul 21, 2004 05:53 PM
Sean S
24 Valve Engine and Drivetrain
11
Nov 15, 2002 12:25 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:55 PM.