3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Idle rail pressure change.... It has gone down!!!

Old Sep 6, 2008 | 02:25 PM
  #1  
Spooler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 5,902
Likes: 5
From: Claxton, GA
Idle rail pressure change.... It has gone down!!!

Well, last night I had a little fun and ran my truck perty hard with my Quad II pressure tune set on 2 and Smarty on 9. When I got back to the house I noticed my rail pressure was down a little. Idleing it is normally at around 6600 to 7000 psi. It has dropped to 6100 to 6400 psi. I drove it today and had the same lower pressures. I am wondering if one of my injectors is about to give up the ghost due to a loss in rail pressure.
Reply
Old Sep 6, 2008 | 04:25 PM
  #2  
MikeyB's Avatar
Registered User
 
Joined: Oct 2002
Posts: 7,543
Likes: 4
From: Tomball, Texas
Only at idle or all through the rpm range?

MikeyB
Reply
Old Sep 6, 2008 | 10:55 PM
  #3  
Spooler's Avatar
Thread Starter
Registered User
 
Joined: Jan 2006
Posts: 5,902
Likes: 5
From: Claxton, GA
Only at idle. I seems normal driving down the road.
Reply
Old Sep 7, 2008 | 12:49 PM
  #4  
XLR8R's Avatar
Registered User
 
Joined: Nov 2005
Posts: 7,785
Likes: 3
From: Pattonville, Texas
I wouldn't worry unless RP drops below 5K at idle.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cbrahs
4th Gen Ram -Non Drivetrain- 2010 and Up
2
Nov 1, 2011 11:00 AM
TAMU
3rd Generation Ram - Non Drivetrain - All Years
7
May 27, 2009 06:34 PM
TAMU
3rd Gen High Performance and Accessories (5.9L Only)
3
Apr 27, 2009 11:26 AM
5.9Excursion
3rd Gen High Performance and Accessories (5.9L Only)
3
Mar 13, 2008 10:56 AM
3500Dooly
24 Valve Engine and Drivetrain
23
Jun 8, 2006 10:21 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:32 PM.