Background info: Edge stacked with van aaken 3.1

Today the gauges where acting a little funky...while driving egts where up around 900*(200 above what they normally are) engine intake temp was up at like 67* it was 29 deg*..Eng temp was normal, rail pressure was normal..went to idle the truck to let her cool down before shut down she wouldnt come pass 700*...shut her down cycled key back on gauges went from 200 to 1000 then back to 600...

going to check connections and probe tomorrow..just bored and wondering if anyone has experienced anything like this..

 

I've had my Edge gauge read funky also, sent it back to Edge and had it cleaned up. No problems since.