3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

how can i get my truck into the low 12 to high 11s

Thread Tools
 
Search this Thread
 
Old Jun 15, 2007 | 09:24 PM
  #1  
fullbore farmer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 49
Likes: 0
Talking how can i get my truck into the low 12 to high 11s

i have a 03 4x4 with a sps62, 4" flopro , edge hot juice, bully dog tripple dog,afe stage2, nadp race tranny, bd fuel system. Iwould like to try to get my truck to run in the 12s or high elevens if possible. Havnt had it at a track yet but would like any ideas that would get me in that general times, any help would be appreciated. thanks
Reply
Old Jun 15, 2007 | 09:27 PM
  #2  
dieselfan's Avatar
Registered User
 
Joined: Jun 2006
Posts: 1,367
Likes: 0
From: Lake Charles,Louisiana
Originally Posted by fullbore farmer
i have a 03 4x4 with a sps62, 4" flopro , edge hot juice, bully dog tripple dog,afe stage2, nadp race tranny, bd fuel system. Iwould like to try to get my truck to run in the 12s or high elevens if possible. Havnt had it at a track yet but would like any ideas that would get me in that general times, any help would be appreciated. thanks
you should be close, injectors and some spray would help.
Reply
Old Jun 15, 2007 | 09:32 PM
  #3  
fullbore farmer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 49
Likes: 0
i would like to get some injectors but not shure of what size and kind because i do use my truck to haul some.
Reply
Old Jun 15, 2007 | 10:29 PM
  #4  
eodshawn's Avatar
Registered User
 
Joined: Apr 2007
Posts: 102
Likes: 0
From: Missouri
my buddy has an 03 or 04 3/4 ton with twin turbos and a bunch of other stuff running into the 11s finally.
Reply
Old Jun 15, 2007 | 10:41 PM
  #5  
WUnderwood's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1,618
Likes: 0
From: TEXAS
your going to need a lot more fuel and air to get into the 11s. are you going to use drugs?
Reply
Old Jun 15, 2007 | 10:47 PM
  #6  
fullbore farmer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 49
Likes: 0
would like to do it on #2 but will use drugs if needed
Reply
Old Jun 15, 2007 | 11:04 PM
  #7  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
If you tow 50 hp sticks are what your goona want
Reply
Old Jun 16, 2007 | 12:34 AM
  #8  
CrashCade's Avatar
Registered User
 
Joined: Feb 2005
Posts: 1,248
Likes: 0
From: Idaho Falls & Southern CA
Originally Posted by Luvnacumns
If you tow 50 hp sticks are what your goona want
I will agree, anything bigger runs way too hot... I am looking at alternatives to what I have for injectors.
Reply
Old Jun 16, 2007 | 03:12 PM
  #9  
omaharam's Avatar
Registered User
 
Joined: Jun 2005
Posts: 2,452
Likes: 1
From: Nebraska
Originally Posted by CrashCade
I will agree, anything bigger runs way too hot... I am looking at alternatives to what I have for injectors.
Flux 1.8s just went into my truck. I stressed that I didn't want to lose any towing ability and was told these should work out great for me. Don't know yet, because the truck is still at Floor It with an undiagnosed problem.
Reply
Old Jun 16, 2007 | 06:38 PM
  #10  
wap's Avatar
wap
Registered User
 
Joined: Aug 2005
Posts: 3,563
Likes: 1
From: Ga.
IF $ isnt that big of a deal some biggER sticks, twins and some spay aught to do it.

omaharam, how is that 3k workin out for ya? I havent heard much about it lately.

Sorry to hijack, pm me if necessary
Reply
Old Jun 16, 2007 | 07:23 PM
  #11  
acook's Avatar
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
scarry larry stacked with an EZ, GDP comp fuel system, studs, idaho twins, DDP 110 injectors, fully built tranny with copilot, floor it stage II+ pump, boost fooler, guages, ran a 12.289 last night at 110.56
Reply
Old Jun 16, 2007 | 11:56 PM
  #12  
morkable's Avatar
Registered User
 
Joined: Aug 2006
Posts: 5,426
Likes: 1
From: Fort McMurray, Alberta
scary larry wont work on a 03. get rid of the bullydog,, get injectors, more air (bigger turbo) and a few other things and you should be there,, where are you going to be racing at?

Kevin
Reply
Old Jun 17, 2007 | 04:25 PM
  #13  
fullbore farmer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2005
Posts: 49
Likes: 0
how does the front drive shafts and the transfer case hold up with 18psi or 20 psi boost launches
Reply
Old Jun 17, 2007 | 07:14 PM
  #14  
acook's Avatar
Banned
 
Joined: Feb 2006
Posts: 1,221
Likes: 1
From: C.S.U. Pueblo Co.
I do 25-30PSI launches and havent had a problem with my stock t-case or driveshaft.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jay_d
24 Valve Engine and Drivetrain
7
Oct 20, 2009 09:25 PM
jaredb900rr
3rd Gen High Performance and Accessories (5.9L Only)
11
Jul 20, 2009 01:09 AM
wcbcruzer
2nd Gen. Dodge Ram - No Drivetrain
10
Sep 5, 2008 08:36 AM
dieselfan
Performance and Accessories 2nd gen only
11
Aug 25, 2006 01:49 AM




All times are GMT -5. The time now is 06:58 PM.