The isolator keeps you from having fuel run into the passenger compartment, instead of fuel there is antifreeze that runs from the isolator to the gauge, the fuel only runs from the CP3 pump to the isolator.

I have found that the isolator when mounted to the lip of the firewall transfers the pulses from the pump into the dash.

I need to try and isolate the isolator from the firewall better to stop the transfer of noise into the passenger compartment.

 

I have mine mounted there and have not noticed any noise.

 

Will the Isspro guages fit ok in the triple in-console mounts. I notice it says you may need to mod for other than autometer guages.

thanks..

 

JohnCA58 You have the outlook and you did not share it with me? LMAO I thought you were a stocker type of guy?

Just a sneaky stocker type of guy I knew I liked you!

I just pruchased the Quad race box and intake! Today!

C'mon UPS GUY!!

Rick

 

nonford,

Yes they will we have done it here, depends on the depth you set it at but you might need to clip off the threaded studs on the rear, wire clippers does it easily. Give us a call if you have any questions etc we stock the Isspros and all the mounts.

Mark @ DPPI

 

Thanks Mark! Josh took my order.....