3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

GDP 392 kit what's the warranty?

Thread Tools
 
Search this Thread
 
Old Dec 25, 2008 | 11:25 PM
  #1  
RonP's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 706
Likes: 0
From: Winston Salem, NC
GDP 392 kit what's the warranty?

Well of all times it could happen, tonight me and the family go see a movie and when we are leaving the theater I happen to notice I have no low side fuel pressure. truck seems to be running ok so I pull over and crawl underneath and the Walbro is dead. I start the truck back up and drive it home about 12 miles using very light throttle. So I guess the CP3 was pulling fule through it?

anyway about 6 months ago I had a little paypal money sitting there and something told me to buy a spare Walbro. I just got in from outside replacing the pump and she is back to holding 22psi on the low side.

anyone know how long the Walbros in the GDP kits are warrantied for? mine has been on for about 1 1/2 years and about 26,000 miles.
Reply
Old Dec 25, 2008 | 11:37 PM
  #2  
torquefan's Avatar
Registered User
 
Joined: Sep 2003
Posts: 4,449
Likes: 47
From: Calgary, Alberta
Not sure what the warranty is, it may say right on the Glacier website, if that's where you got it. If it doesn't say, send Rich an email.
Reply
Old Dec 25, 2008 | 11:54 PM
  #3  
RonP's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 706
Likes: 0
From: Winston Salem, NC
Thanks, I couldn't find the kits on the site (must not sell them any more) but the instructions are still there and it looks like only a year. Guess I better buy another one to keep in the truck. A little disappointed in the time this lasted though.
Reply
Old Dec 26, 2008 | 12:37 AM
  #4  
tcr's Avatar
tcr
Registered User
 
Joined: Sep 2003
Posts: 3,188
Likes: 0
From: Austin, TX
Originally Posted by RonP
Thanks, I couldn't find the kits on the site (must not sell them any more) but the instructions are still there and it looks like only a year. Guess I better buy another one to keep in the truck. A little disappointed in the time this lasted though.
Sorry to hear, now you have me worried! Where are you getting the pumps, I need a spare I guess.
Reply
Old Dec 26, 2008 | 06:52 AM
  #5  
madhat's Avatar
Administrator/Jarhead
15 Year Member
Liked
 
Joined: Jun 2006
Posts: 14,999
Likes: 33
From: Jonesborough, TN
I think that they are a year. Richard is really good to work with.
Reply
Old Dec 28, 2008 | 05:03 PM
  #6  
DODGER BOMBER's Avatar
Registered User
 
Joined: Mar 2006
Posts: 689
Likes: 0
From: Kelliher, Saskatchwan, Canada
for what they cost i would not even worry. Whats a 120 bucks now a days. Mine just died also after 145,xxxkm. Put the new one in and all is back to normal.
Reply
Old Dec 28, 2008 | 05:56 PM
  #7  
RonP's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 706
Likes: 0
From: Winston Salem, NC
already been replaced and back to normal. the 120 isn't a big deal but replacing it after 26,000 is not what I was expecting.
Reply
Old Dec 28, 2008 | 11:17 PM
  #8  
JJPage's Avatar
Registered User
 
Joined: Mar 2008
Posts: 791
Likes: 0
From: Spokane Valley / Thompson Falls, MT.
No Kidding, will be checking this out.
Reply
Old Dec 29, 2008 | 06:56 PM
  #9  
DODGER BOMBER's Avatar
Registered User
 
Joined: Mar 2006
Posts: 689
Likes: 0
From: Kelliher, Saskatchwan, Canada
Originally Posted by RonP
already been replaced and back to normal. the 120 isn't a big deal but replacing it after 26,000 is not what I was expecting.
Sorry i didnt see that it only had 26k miles on it. Mine had almost 100k miles on it. I still think these are one of the quietest pumps out there and mine doesnt seem to have a problem keepin up with my demands..
Reply
Old Apr 11, 2009 | 04:53 PM
  #10  
y2kram's Avatar
Registered User
 
Joined: May 2006
Posts: 91
Likes: 1
From: Phoenix, AZ
Originally Posted by RonP
Guess I better buy another one to keep in the truck. A little disappointed in the time this lasted though.
Same here. Just ordered a new Walbro 392 today. The last day or so I've seen the pressure drop to zero under normal acceleration. I've already replaced the return valve - thought maybe it was stuck open. I've had mine on a few months shy of 2 years.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
13ALPHA
Performance and Accessories 2nd gen only
11
Jan 14, 2008 07:46 PM
BossHogg
3rd Gen High Performance and Accessories (5.9L Only)
11
Mar 29, 2007 01:51 PM
BossHogg
3rd Gen High Performance and Accessories (5.9L Only)
4
Mar 27, 2007 08:22 AM
CTD2506
3rd Gen High Performance and Accessories (5.9L Only)
3
Feb 26, 2007 07:51 AM
BossHogg
3rd Gen High Performance and Accessories (5.9L Only)
34
Oct 7, 2006 12:53 PM




All times are GMT -5. The time now is 10:19 AM.