Can someone jump in and elaborate on the install procedure for a fuel pressure gauge on the 04.5 ?? I am probably going to just install the gauges myself and I wasn't sure if I needed any extra fittings to install the gauge or not ?? I noticed genos sells a fuel filter cap with a fitting in the top that fits the fuel pressure gauge. My question is do you want to monitor fuel pressure before or after the fuel filter ???

 

After is fine. We also sell the install kit that makes the install a breeze, just so you know.

John

 

I installed one on my 05 yesterday got the whole kit from Piers ,fairly easy took about 2 hours with putting on my pillar.But I had help from my 3 year old.I put mine right at the inlet to the cp3 pump.

 

Sorry,never took any pics but the banjo bolt comes in the kit.There was nothing for third gen instructions but I just followed the line from the filter housing to the cp3 and switched the stock bolt for the one the came in the kit,it comes with new copper washers as well.

 

I got a banjo bollt and washers from Genos and tapped into the bottom of the filter holder. That way I am monitoring post filter. Remove the wheel liner and you will have easy access to the filter holder. Easy job.