I am putting on a Donaldson muffler with my stacks tomorrow . My problem is I need about two inches more for the big ol muffler is it ok to cut some off the flex pipe don't think I have enough room to cut the elbo any help would be great!

 

I'm sure you can. I would cut that before cutting the elbow if possible.

 

That's what I thought to but I'm just a little nervous once I cut there is no turning back

 

I've cut tons of flex pipe on big truck and equipment installs. I use a sawzall and it works fine.

Just don't cut it off twice or it will still be too short. lol

 

Thanks for the help I'm doing it today hope we can make it fit it going to be real tight