I am looking for the part # for the fleetguard filter head used with the 2 micron filter(#5320). Anyone have this handy. I have access to all the pushlock fittings and am able to build my own brackets. I know there are several different filter heads that will work with this filter but I am looking for one that has the 4 boltholes in the top. I want to add the 2 micron filtration to my truck and I kinda enjoy building this stuff from scratch rather than buying a prebuilt kit. I have a part # that is a cummins part# 3930618S. The thing is nobody at the local Cummins store can give me a description of this part #. All they can tell me is that it is available. Is this the correct #?

thanks in advance.

David

 

that is the right cummins part number. it is about $20

 

X2

Chris

 

Thanks guys, thats what I needed to know.

David

 

use a baldwin FB1311, its the same as a Fleetguard with the 4 bolt holes and it is cheaper. The casting is very nice, it is not a cheap foreign made item. They are used by CAT diesel as original equiptment also.

 

That's not the Cummins part number I used. Mine also has the 4 mounting holes. I have the invoice right here. It's part # 142784-s from my local Cummins shop. Wonder what the difference is?

 

When I searched online for the Cummins number starting with 3 it was replaced with the number Omaharam listed. But again it is a casting made from one manufacturer and sold to CAT,Cummins,Fleetguard,Baldwin,etc. for distribution. So just find where you can get it the cheapest. It is the same item.

 

Could you give dimensions of the push locks, or tell me the part numbers and brand please.
Time for me to install a primary filter.
Thank you,
Mike

 

baldwin has a 2 micron drop in filter that fits in the oem housing

 

Glacier Diesel Power has those parts,and numbers too,I belive.