dodgediesel

Does anyone know the micron rating for these smaller filters. I now have the Fleetguard FF 5712 and the FS 19768 replacment filters. Does anyone know the microns on the Fleetguards?? Dan, you out there????

soulezoo

I believe it is 3 micron.

AH64ID

FS19768 is 140um with 50% free water sep and 0% emulsified water sep at 19.82GPH (OE spec is 95% free and 95% emulsified water removal at 36.5GPH.. so the FASS doesn't even meet OE spec on f/w sep)

FF5712?? Is that a typo? Its not even in the Fleetguard catalog.

soulezoo

FF5712 is the # that Dan gave here a while ago.

soulezoo

That is a very disappointing revelation on the water separator.

AH64ID

Its the same issue the AD's have than has been kicking around for months. (same filter)

AH64ID

My catalog is a 2007 unit, but the FASS has been around longer than that...

dodgediesel

FF5712 is a new release Fleetguard replacment for the 95 series FASS. I have one in my hands and it's identicle to the FASS original 95 series, just made by Fleetguard vs DPP. I was finally able to get these just 2 weeks ago, they are that new of a filter just like the Fleetguard FS19768. Hope that made some sense???

AH64ID

Gotcha... But the FS19768 isn't all that new, its the same filter thats on the AD.

dodgediesel

You bet. It is hard to get both of them up here in Canada for some strange reason??? I think it's just 2 not commonly used Fleetguard filters. So they are 3 micron?

AH64ID

Haven't found the micron rating yet, but yes they are really only used by AD/FASS.

Wcsting

How often do these need to be changed?

AH64ID

Just got the info on the FF5712

10um absolute
5um at 83%
34Gr of dirt at 3.9PSID
Rated for 228 GPH
13/16-16 thread size.


So this is a 10um filter... (No clue where 3um came from)