F1 Cam and Spring Sale
Thread Starter
DTR Advertiser
Joined: Sep 2002
Posts: 741
Likes: 0
From: Va Beach,Va
F1 Cam and Spring Sale
We are running a special sale for new Helix 2 Bolt on cams and F1 Sportsman springs. These are new cams not regrinds. Pricing is at my website www.trediesel.com under Engine hard parts. The cams are almost half what they used to sell for. Call or pm me for any specifics. Tim
Registered User
Joined: Jan 2007
Posts: 685
Likes: 0
From: Home of the Beaver
QUOTE=Timinva;2106520]We are running a special sale for new Helix 2 Bolt on cams and F1 Sportsman springs. These are new cams not regrinds. Pricing is at my website www.trediesel.com under Engine hard parts. The cams are almost half what they used to sell for. Call or pm me for any specifics. Tim[/QUOTE]
those are good prices i tell ya
those are good prices i tell ya
Registered User
Joined: Apr 2008
Posts: 529
Likes: 0
From: Jacksonville NC
WOOHOO
. I thought i was gunna have to wait another 3 or 4 paychecks for the helix 2.... I saw the deal from source automotive, and bought one 3 minutes later. too good to pass up.
conditions: you have to use your stock drive gear and press it on, then the bolt is added assurance so if your cam is buggered and your looking to fix it, make sure you get a drive gear to boot. ALSO. as of 1910 on thursday the 5th.... they have 8 of 50 left and the sale just started. My bad, 7 of 50
.
I cant wait to install,
i have heard nothing but good things about the helix 2, and F1's products in general.
. I thought i was gunna have to wait another 3 or 4 paychecks for the helix 2.... I saw the deal from source automotive, and bought one 3 minutes later. too good to pass up.conditions: you have to use your stock drive gear and press it on, then the bolt is added assurance so if your cam is buggered and your looking to fix it, make sure you get a drive gear to boot. ALSO. as of 1910 on thursday the 5th.... they have 8 of 50 left and the sale just started. My bad, 7 of 50
.I cant wait to install,
i have heard nothing but good things about the helix 2, and F1's products in general.
Trending Topics
Registered User
Joined: Jan 2004
Posts: 2,696
Likes: 1
From: Maritimes, Canada
Can someone give me the 411 on these cams....were the original cams billet or forged and are these cheaper cams, forged or cast. I keep hearing that the cast on is the one available and the billet is not....give it to me straight. KS
KS
Registered User
Joined: Mar 2005
Posts: 6,259
Likes: 1
From: Utah
they have alway been cast cams..read here for a very small bit of info from the man himself....https://www.dieseltruckresource.com/...d.php?t=199453
DTR Advertiser
Joined: Jun 2002
Posts: 3,347
Likes: 1
From: In the Shop
Steel billet cams are in the works. Perhaps 60 days or so.
Registered User
Joined: Mar 2005
Posts: 6,259
Likes: 1
From: Utah
Registered User
Joined: Dec 2003
Posts: 5,540
Likes: 0
From: Boise, Idaho
A quick question...
Does 800-850 hp on #2 make one's truck a serious contender for the new cam...or is the old one still ok?
Darn...one year later and my Helix is old....
Don...are these for 1000 plus trucks or what?
Does 800-850 hp on #2 make one's truck a serious contender for the new cam...or is the old one still ok?
Darn...one year later and my Helix is old....
Don...are these for 1000 plus trucks or what?
Registered User
Joined: Mar 2005
Posts: 6,259
Likes: 1
From: Utah
Thread
Thread Starter
Forum
Replies
Last Post
etn550
3rd Gen Engine and Drivetrain -> 2003-2007
4
Apr 1, 2010 12:12 PM
bombed24v
3rd Gen High Performance and Accessories (5.9L Only)
10
Sep 16, 2008 07:37 AM