555 Flux blank nozzles
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Sturgis SD
Posts: 1,609
Likes: 0
Received 0 Likes
on
0 Posts
555 Flux blank nozzles
Im just checking if anyone has any info on blank flux nozzles? Last I was told they should be in around the first of April. Im hoping to have a set fluxs by May 1st.
#2
DTR Advertiser
I think a few more weeks is fair to say before we receive them. If we do, we should be able to get to them done up for you in time for May 1st.
Over here; we ask daily when they will ship. I think our factory is getting uptight. LOL
Over here; we ask daily when they will ship. I think our factory is getting uptight. LOL
#7
DTR Advertiser
No updates yet, but I was told it would be roughly 10 more days before the parts would begin to ship. That was about 8 days ago. I hope something happens by Monday. Even if they left today, it takes a week or more before they arrive.
I believe I have 5 sets of 03-04 injectors sitting here at the shop waiting for the parts to arrive.
I can tell you this: The world wide Diesel business is booming. More and more OEM's are using Diesel engines in their line up. Not just in Europe. This is causing a supply problem from the good manufacturers of Diesel parts. I suspect this shortage will not get better in the short term, but worse. I have also seen a 50% increase in parts cost since 2003. )-: Just an FYI if anyone is interested.
I believe I have 5 sets of 03-04 injectors sitting here at the shop waiting for the parts to arrive.
I can tell you this: The world wide Diesel business is booming. More and more OEM's are using Diesel engines in their line up. Not just in Europe. This is causing a supply problem from the good manufacturers of Diesel parts. I suspect this shortage will not get better in the short term, but worse. I have also seen a 50% increase in parts cost since 2003. )-: Just an FYI if anyone is interested.
Trending Topics
#9
quick question......Don any word on your new Cam you mentioned on the other forum??
I would like to pick one up from you when they are ready!!!
thanks for any update or info you got
Mark
I would like to pick one up from you when they are ready!!!
thanks for any update or info you got
Mark
#10
Registered User
Join Date: Mar 2008
Location: Spokane Valley / Thompson Falls, MT.
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Don,
I am very happy with the extrude honed tips you did for my 03 through Rip in Febuary. They gave me a solid 65hp / 110tq gain on a Dynojet, mileage is about the same. Thank You.
Jess
I am very happy with the extrude honed tips you did for my 03 through Rip in Febuary. They gave me a solid 65hp / 110tq gain on a Dynojet, mileage is about the same. Thank You.
Jess
#12
#15
DTR Advertiser
Im so glad to hear that! I remember your injectors. They were some of the nicest 03 injectors I have seen. Very low wear. They must have had very low miles on them.
(-:
CQ,
I did not change the grind. It remains the same. I just added another cam to the line up with the same grind, but a material change. We went to a steel billet material ( SAE 8620, gas carbed steel ) for the hard core HP guys. We also have the older style as well, like everyone has now, but the steel billets I feel are needed as the power goes up and up.