Edge Juce Dyno Results
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: Houston
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Edge Juce Dyno Results
I recentley installed the Edge Juice with Attitude on my 2005. I am very pleased with the results. I have not seen the EGT go over 1300. Dyno results as follows:
Other wise stock 2005 600.
Stock - 272.47 H.P.
Lvl 3 - 353.15 H.P.
Lvl 4 - 371.92 H.P.
Lvl 5 - 399.10 H.P
Preformed 2/11/05 on Dynojet
Other wise stock 2005 600.
Stock - 272.47 H.P.
Lvl 3 - 353.15 H.P.
Lvl 4 - 371.92 H.P.
Lvl 5 - 399.10 H.P
Preformed 2/11/05 on Dynojet
#3
Registered User
Join Date: Apr 2004
Location: St. Louis
Posts: 1,484
Likes: 0
Received 0 Likes
on
0 Posts
Re: Edge Juce Dyno Results
Originally posted by TXBoozer
I recentley installed the Edge Juice with Attitude on my 2005. I am very pleased with the results. I have not seen the EGT go over 1300. Dyno results as follows:
Other wise stock 2005 600.
Stock - 272.47 H.P.
Lvl 3 - 353.15 H.P.
Lvl 4 - 371.92 H.P.
Lvl 5 - 399.10 H.P
Preformed 2/11/05 on Dynojet
I recentley installed the Edge Juice with Attitude on my 2005. I am very pleased with the results. I have not seen the EGT go over 1300. Dyno results as follows:
Other wise stock 2005 600.
Stock - 272.47 H.P.
Lvl 3 - 353.15 H.P.
Lvl 4 - 371.92 H.P.
Lvl 5 - 399.10 H.P
Preformed 2/11/05 on Dynojet
And you don't have tranny mods yet,...right? Wait till you do!!!! I haven't dynoed yet, but it feels like the box is beaucoup more powerful with tranny mods. I mean major difference!
#5
Registered User
Thread Starter
Join Date: Jan 2005
Location: Houston
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
The people at the dyno could not get the torque #'s, because I guess you have to attach some kind of lead or something to the craknshaft to get rpm, but they were unable to get it to work. Hope to try again soon.
Thread
Thread Starter
Forum
Replies
Last Post
JBradley500
1st Gen. Ram - All Topics
16
08-30-2010 07:31 AM
pwerwagn
Natl. and Regional Chapters / Special Events
2
02-28-2007 03:18 AM