3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Edge EZ without gauges

Thread Tools
 
Search this Thread
 
Old Jan 28, 2007 | 04:43 PM
  #1  
getblown5.9's Avatar
Thread Starter
Banned
 
Joined: Jan 2005
Posts: 2,997
Likes: 0
From: Baltimore, MD
Edge EZ without gauges

My father has an 04.5 CTD and I am buying him an Edge EZ for it. He mainly wants it for the 1st level gains for fuel mileage. He is one of those guys who never goes WOT unless he is merging into fast moving traffic and its necessary. Also the only towing we do is limited to 6k or less with ATV's on our trailer...and possibly my truck if I were to break at a sled pull and need to get it home (we could turn it off then)

He has expressed that he doesn't want gauges tho(I've tried repeatedly to tell him they are only there to help the truck stay safe), so I was wondering if the EZ would raise EGT's and or trans temps enough to require gauges to be installed.
Reply
Old Jan 28, 2007 | 05:07 PM
  #2  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
I think that you would be ok I imagine it is comparable to the quad zxt box. I am sure other's with the ez will chime in. But I don't think with his driving habits hell blow her up ..

Shane
Reply
Old Jan 28, 2007 | 05:20 PM
  #3  
cb's dodge's Avatar
Registered User
 
Joined: Oct 2006
Posts: 79
Likes: 0
From: tn
I agree if he dosen't hot rod you will be fine. One of my buddies has the ez on his 06 and he hauls cows and he has been ok so i think that you will be fine
Reply
Old Jan 28, 2007 | 06:01 PM
  #4  
mj007's Avatar
Registered User
 
Joined: Nov 2006
Posts: 511
Likes: 0
From: Western Colorado
When he's pulling a load just have him keep the switch on 1 or 2.
Reply
Old Jan 28, 2007 | 07:32 PM
  #5  
Speed Shift's Avatar
Banned
 
Joined: Oct 2006
Posts: 1,136
Likes: 0
From: Corpus Christi, TX
Originally Posted by getblown5.9
My father has an 04.5 CTD and I am buying him an Edge EZ for it. He mainly wants it for the 1st level gains for fuel mileage. He is one of those guys who never goes WOT unless he is merging into fast moving traffic and its necessary. Also the only towing we do is limited to 6k or less with ATV's on our trailer...and possibly my truck if I were to break at a sled pull and need to get it home (we could turn it off then)

He has expressed that he doesn't want gauges tho(I've tried repeatedly to tell him they are only there to help the truck stay safe), so I was wondering if the EZ would raise EGT's and or trans temps enough to require gauges to be installed.
He will be fine, even on 3...... if he dosent lay into it for a long time.

I have the same stubbern father problems..... I put 275rv's, comp box, EZ, Holley Blue pump, and Southbend Con, in my dads, and he still wont buy any guages. He pulls a D4 dozer (32,000lbs ttl) with his, on the floor and still hasnt blown it up yet. It took a new new VP44 for him to realize he needed a pusher pump. And it will take a new motor for him to get a EGT gauge.

Stubbern old farts!
Reply
Old Jan 28, 2007 | 09:04 PM
  #6  
973604x4's Avatar
Banned
 
Joined: Apr 2006
Posts: 3,141
Likes: 0
From: College Station, Texas
on a 0-80 run with an EZ alone on a stock turbo i hit 1500* on the pyro.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JaimeG
3rd Gen High Performance and Accessories (5.9L Only)
2
Mar 26, 2009 06:58 AM
griffy
3rd Gen High Performance and Accessories (5.9L Only)
14
Jan 13, 2008 05:17 PM
sam
Performance and Accessories 2nd gen only
7
Dec 28, 2006 09:32 AM
coontz0473
3rd Gen High Performance and Accessories (5.9L Only)
17
Sep 22, 2006 03:52 PM
Duckman1993
1st Gen. Ram - All Topics
12
Sep 12, 2006 07:50 PM




All times are GMT -5. The time now is 05:13 PM.