3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

cp question in dual setup

Thread Tools
 
Search this Thread
 
Old Feb 23, 2009 | 06:39 PM
  #1  
82NDSNPR's Avatar
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 813
Likes: 0
From: manteca ca
Question cp question in dual setup

hey guys i have a stage 3 floor it pump just bought an II dual pump kit with stock pump from another dude. my quesiton is by running dual pumps am i now wasting the stage 3? i mean the pumps run together so is it a waste to keep my stage 3 and not just use a stock cp3. or will i still get the extra fuel out of the floor it pump?
Reply
Old Feb 23, 2009 | 07:20 PM
  #2  
Riflemanusmc's Avatar
Registered user
 
Joined: May 2008
Posts: 1,520
Likes: 0
Well, I dont see that your going to overfuel it by running that setup...
Reply
Old Feb 23, 2009 | 07:23 PM
  #3  
OT-OF-Here's Avatar
Registered User
 
Joined: Apr 2004
Posts: 1,484
Likes: 0
From: St. Louis
cp3 question

I say it would be a waste or unnecessary. You could be running 1000hp and more and not be pushing the capacity of a stock dual cp3 setup.

Sell your lvl 3 pump and buy some NOS.
Reply
Old Feb 23, 2009 | 08:07 PM
  #4  
82NDSNPR's Avatar
Thread Starter
Registered User
 
Joined: Jul 2007
Posts: 813
Likes: 0
From: manteca ca
the nos has been bought just wondering if i should keep the pump since i have the dual kit now if it wont add any more fuel over a stock one at a certin rpm then its a waste for me to keep the pump. overfuel is not the point i was wonder lets say pump 2 is pushing x amount of fuel then the stage 3 pump is linked and will only push x amount of fuel there for not working or holding the pump back.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ryanihf250
1st Gen. Ram - All Topics
5
Jan 17, 2008 02:58 PM
texasredrider
3rd Gen High Performance and Accessories (5.9L Only)
2
May 6, 2006 10:30 AM
zapata
3rd Generation Ram - Non Drivetrain - All Years
6
Apr 19, 2006 12:28 PM
noworries
General Diesel Discussion
12
Jun 21, 2005 09:03 PM
John Rodriguez
3rd Generation Ram - Non Drivetrain - All Years
9
Jan 21, 2005 10:54 PM




All times are GMT -5. The time now is 03:08 AM.