Congrats Oneton
#1
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
Congrats Oneton
heard a dirty rumor from Shane that Rob laid down
701hp on smarty level 3
852 on level 7
831 uncorrected!
WAY TO GO ROB!!!!
701hp on smarty level 3
852 on level 7
831 uncorrected!
WAY TO GO ROB!!!!
#5
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
He got something like 864 last sprind at BD's Dyno Days, he got closer to 900 at the fall one but he just got it running before that so I'm sure he'll do better once it gets dialed in.
Must be a blast to drive alraight!
Must be a blast to drive alraight!
Trending Topics
#8
Registered User
Join Date: Nov 2002
Location: Boise, ID
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
We seemed to of found a wall in programming. We tried the Smarty, Smarty and TST, and just the TST. We also tried all of the above with and without a MP-8 and Predator. The Smarty on Level 3 and 5.1's made 701hp uncorrected. With 6.5's it made 738hp and with the MP-8 it made 858hp. We were able to get to 878hp uncorrected (930hp corrected) but no matter what we tried it wouldn't go past that. Rail pressure held 25k plus and egt's only got above 1200* with the TST. The fueling falls off right around 3300rpms even though it will turn 4000. The exhaust goes totally clean when it hits 3300. It's gaining 50hp every 100rpms prior to defuel. So now we need Marco's help to get it to fully fuel to 4000. I think this is why no one is making over about 900hp on fuel with a 04.5 and up truck.
#10
Registered User
Join Date: Feb 2008
Location: Vancouver Island BC
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered User
Join Date: Feb 2008
Location: Vancouver Island BC
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Nice EGTs....Mine are a bit more than twice that......
Should I be concerned??
Missed your first post Idaho CTD.
Good luck hunting....You need Nightforce!
Should I be concerned??
Missed your first post Idaho CTD.
Good luck hunting....You need Nightforce!
#14
Registered User
Join Date: Jan 2007
Location: Home of the Beaver
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
thanks guys....trip was a blast. Nathan is a good dude and took very good care of us.
There is no doubt in my mind that the truck will hit 1k once the tuning allows this to happen.
I will run 6.5's or 7's on the street. I can handle the smoke with my 6 speed..
My truck is off loaded and on the hoist for some minor adjustments....well OK my rear brakes need looked at!
There is no doubt in my mind that the truck will hit 1k once the tuning allows this to happen.
I will run 6.5's or 7's on the street. I can handle the smoke with my 6 speed..
My truck is off loaded and on the hoist for some minor adjustments....well OK my rear brakes need looked at!