BigTXDually

Im looking into putting a modded cam in my truck and i figured that i would see what others out there are running and having luck with? Thanks for any input.

demon1

i only have experiance with the maxspool cams. we have one on our shop truck and it performs very well. the first thing i noticed after the install was how well the truck idled afterwards. also the spool up time was greatly reduced, along with reduced egts.

PourinDiesel

I run a Helix 2 and F1 valve springs with my puller.

If you want to see it in action check out my vid's.

WUnderwood

Maxspools are re-grinds, might want to stay away from them, they tend to break

82NDSNPR

helix one and springs here but still need to get them installed that alone is going to run about 1300 the cheapest i can find from a good performance shop. if i get them installed for the price i will be at 2800 total did not think i would be droping that much kind of hurt. 850 cam 650 springs 1300 install....

cquestad

I have a Helix 2 and F1 springs...they work.

Ooooooohhhhhhhhhhhh the air.

BigTXDually

Thanks y'all i appreciate a lot, any more info is great too

judge88

helix 2 with some sportsman springs is hard to beat and proven.