News from the shop -- the evil twin CP3 add on pump will not permit the banks Hi-Ram intake to be attached, ideas suggestions?

 

i dont know if hes on here but bhaner had same problem,redrilled a bracket i think,it works now

 

I would suggest that you remove all the componets for the twin CP3, box them up and send them to me! And keep the banks high ram intake on!

Or I guess if it was my truck, I would toss out that banks thingie and let the twins move in!!

Dustin

 

use the stock intake horn, the Banks wont work

Pourin Diesel tried to make the Banks intake work, and it didnt

hope this helps

 

I would sacrifice the banks and get a different intake horn that is compatible.

 

Is it compatible with the CFM+??? No hijack intended.....

 

The just told me that clocking the cp3 and maybe make it work. But I'd love to know if cfm+ works ... I don't have stock intake anymore

 

I have the evil kit and the CFM will work and i was gona putt it on untill last tusday a guy i was pullin with blew up his CFM intake BIG time at only 60psi put a nice dent in the hood also. This is not the 1st i have heard of this either.

 

Pix please?

 

If i remember correctly the only reason why the banks highram wont work is because of the raised letters on the front. someone ended up grinded off letterings and it worked just fine. this was a few months ago when i read that forum.

 

Just got off the phone with my shop they clocked the cp3 and redrilled some holes in the bracket, all is good now. Should be finishing up and firing her up sometime tomorrow

 

amazing- Banks high ram with zero reported failures gets bashed, while CFM+ with several documented failures is treated like it's been blessed by the Pope.

 

I think Banks gets bashed for their pricing & advertising policy.

 

amazing, I have also heard of them going ka boom.

 

i bought my high ram for around $70 less than what CFM+ and ATS wanted for theirs at the time. if you want to say the 6 gun or the packaged stuff like the big hoss bundle is over priced, has too many safeguards, and not much bang for the buck, you'll get no argument from me, but how can saving money on stuff like a CAC or intake horn lead to bashing based on their prices? i got bashed for picking the bullet over the quad for a little added pressure and gauges, and since then my bullet gauges have been trouble free and it's done a good job of adding some needed pressure to the BDTD, while there are about 10 pages of posts with people having issues with their quad products.