Looks like I am going to be ordering a set of XD Series Diesels in a 22x12 to replace a set of 22x9.5's. Had one come off truck and am having a p.i.t.a. in dealing with the company that has the replacement wheel. If you got 12 inch wide wheel em please post a pic. Going to put the 305/40s on that I already have and hope I can turn them. When those wear out, or don't fit going to a 6-8 inch lift and 37s

 

i have a set of 18x10 helos on my truck with 33x15.50-18s on mine with a three inch lift in front and they just barely rub full lock. I could do a little trimming that would take care of it just havent got around to it yet. what kinda offset are these rims?

 

The dealership said their supplier said like a 6.5" backspacing which is what my current wheels are running. I doubt that I will be able to turn them without a leveling kit at a minimum. My wheels stick out now maybe 1 1/2" or so. Looks good now but want to do a lift something fierce.

 

I had a set that I put on my truck on not being lifted way up they stuck out way too much for me

 

Where is a good spot to find a 17x12 wheel with lots of back spacing to suck in the tires?

 

You check weld wheels yet? or maybe mickey thompson those would be the only i can think of.

 

I think Profab makes custom wheels.

 

I am running a 22x11 on my superduty... I almost got the 22x14's but just couldnt justify the extra $$$$

 

When I sled pull I run a set of 375-50-18 mtz's on dc1 18x12's. Got a killer deal on them and matched my every day wheels.

 

I cropped the photo so I wouldnt get in trouble... here is my 22x11 MKW with a 40x15.50 Toyo

 

I know its a 2nd gen but these wheels are Welds 12 wide they were good wheels.