Any ideas??
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
Any ideas?? (HELP)
Finished putting my truck together after changing the injectors. Now we cant get it to start, any ideas? Any thoughts would be gratefully considered
Kevin
Kevin
#6
I just called a guy and he reminded me of my problem...
When we put my truck back together I couldn't get it to start... I didn't have one of the high pressure fuel lines tight. I guess it wasn't building up enough pressure to start it.
You probably already have, but check all the lines for leaks.
After we got it tight, it took a few seconds of cranking before it fired up.
When we put my truck back together I couldn't get it to start... I didn't have one of the high pressure fuel lines tight. I guess it wasn't building up enough pressure to start it.
You probably already have, but check all the lines for leaks.
After we got it tight, it took a few seconds of cranking before it fired up.
#7
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
we just finished checking that, actually took it right apart and redid everything from the injectors on up. still just cranks, we have fuel up there, just did a check on that
Kevin
Kevin
Trending Topics
#11
Registered User
Thread Starter
Join Date: Aug 2006
Location: Fort McMurray, Alberta
Posts: 5,426
Likes: 0
Received 0 Likes
on
0 Posts
Im just doing a search right now,, it means that the computer and the key dont get along, but it seems to be rather common,, so I dont know.... getting frustrated,, cant think of anything else
Kevin
Kevin
Thread
Thread Starter
Forum
Replies
Last Post
Dufrain
General Diesel Discussion
39
04-05-2005 09:00 PM
blackboat
2nd Gen. Dodge Ram - No Drivetrain
5
01-10-2003 02:50 PM