810 hp on a Mustang 1100
Registered User
Joined: Jan 2008
Posts: 298
Likes: 0
From: Edmonton
Great numbers anyway, I'm jelous.
Registered User
Joined: Jan 2006
Posts: 1,484
Likes: 0
From: swinging wrenches in MD
I realize that. My point is simply that it's not tow friendly, because if you can't even start a dyno run until over 2K rpm, you aren't yanking a trailer with any kind of driveability.
It goes without saying that a 800+hp truck isn't really designed to tow-- right?
My truck hits 900lb-ft at 2K rpm. This sheet shows that happening 700rpm later-- that's a huge amount for a rev-limited diesel.
But I'm one of those conservative types that hasn't embraced higher RPM yet. I personally don't want to be winding up my truck to 2600+ rpm just to yank a trailer.
I'm not saying there's anything WRONG with this--- just that it's a part of the compromises you make in the name of big HP.
And I don't care who you are-- that's BIG hp! Good job!
jmo
It goes without saying that a 800+hp truck isn't really designed to tow-- right?
My truck hits 900lb-ft at 2K rpm. This sheet shows that happening 700rpm later-- that's a huge amount for a rev-limited diesel.
But I'm one of those conservative types that hasn't embraced higher RPM yet. I personally don't want to be winding up my truck to 2600+ rpm just to yank a trailer.
I'm not saying there's anything WRONG with this--- just that it's a part of the compromises you make in the name of big HP.
And I don't care who you are-- that's BIG hp! Good job!
jmo
If one tun is happy with it, and if he is still able to tow his 5th wheel camper on family outings, isn't that all that matters?
Registered User
Joined: Apr 2003
Posts: 6,564
Likes: 6
From: Cummins Technical Center, IN
Yessir-- absolutely all that matters is HIS satisfaction.
I'd love to have a ride in that truck someday. Maybe he'd let off the loud pedal long enough for me to breathe....
I'd love to have a ride in that truck someday. Maybe he'd let off the loud pedal long enough for me to breathe....
Thread Starter
Registered User
Joined: Jan 2007
Posts: 685
Likes: 0
From: Home of the Beaver
I'm hitting the dyno again next week and that will be confirmed. No spray
Thread Starter
Registered User
Joined: Jan 2007
Posts: 685
Likes: 0
From: Home of the Beaver
The first of many runs!
I'm running again Thursday and then off to BD Friday.
Round two I plan to change it up...run different Smarty settings. Between now and then I need to figure out why my pressure is down. I have a data cable wired in the factory harness, I'm wondering if this is causing interuptions?? The logger reads pressure 100 times per second, looking at the graph my pressure was the low from start to finish. 5k more rp pressure should put me into the 850 zone.
At the end of the day this truck drives perfect, for that matter I have no electronics in it right now. Smoke is minimal, but injector rattle is horrible....need to resolve the rp issue.
So have you wound her up on the rollers? Its time dude!
o.
I'm running again Thursday and then off to BD Friday.
Round two I plan to change it up...run different Smarty settings. Between now and then I need to figure out why my pressure is down. I have a data cable wired in the factory harness, I'm wondering if this is causing interuptions?? The logger reads pressure 100 times per second, looking at the graph my pressure was the low from start to finish. 5k more rp pressure should put me into the 850 zone.
At the end of the day this truck drives perfect, for that matter I have no electronics in it right now. Smoke is minimal, but injector rattle is horrible....need to resolve the rp issue.
So have you wound her up on the rollers? Its time dude!
o.
not bad onetun especially for just getting started with testing , congrats 
it will take some more time to get things dialed in but once you get the boost , fueling , programming dialed in & get on a good friendly dyno IMO you will be around 850 - 900 hp especially with those sticks in there and the TNT-R
give nathan a call to see if he can offer any help , maybe also ask bob wagner & marco to get involved with the programming , seems like don m already has you covered with the fluxs but won't hurt to get his input as well
onetun your truck is well on it's way, GREAT RESULTS !
it will take some more time to get things dialed in but once you get the boost , fueling , programming dialed in & get on a good friendly dyno IMO you will be around 850 - 900 hp especially with those sticks in there and the TNT-R
give nathan a call to see if he can offer any help , maybe also ask bob wagner & marco to get involved with the programming , seems like don m already has you covered with the fluxs but won't hurt to get his input as well
onetun your truck is well on it's way, GREAT RESULTS !
Registered User
Joined: Jan 2006
Posts: 2,191
Likes: 0
From: Marshfield, Missouri
You got a preassure box or a tst to play with? My rattle was pretty nasty at first and then I took the smarty off for a day and it was gone. The stock timing on the tnt is nasty. Then I realized I could turn it down and problem solved.
Registered User
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
Whoops didn't see that! Looks like it's loosing some fueling in the higher RPM but not that much. Does that hurt much when your on the street? Just wondering if I have the sled behinf me would I be able to get up in the Rpm's. I still might be able to get a few hundered more rpms then the bully dog. I am really anxious to see what people do this year sled pulling with it. I might be able to do a comparison at a couple pulls bully dog vs Smarty.
Registered User
Joined: Feb 2008
Posts: 397
Likes: 0
From: Vancouver Island BC
Hey Ontun,
Trust me....there is more power waiting for you!
Malcolm dynod my Flux 2.5 setup today and he says we just missed 750Hp. I will post the graph tonight.
The funny thing is there is a bit more power to be had!
Here's a few items of note
1) I'm running the smaller Fass pump and it fell on it's face....rail pressure drops below 20k.
2) Malcolm never removed the Smarty de-fueling function (he didn't know my my truck de-fueles badly) or the torque management which would help with the run.
3) The wastegate opens a bit early
I think there is another 20-50hp waiting for a patient tuner.
Looking forward to BD!
Trust me....there is more power waiting for you!
Malcolm dynod my Flux 2.5 setup today and he says we just missed 750Hp. I will post the graph tonight.
The funny thing is there is a bit more power to be had!
Here's a few items of note
1) I'm running the smaller Fass pump and it fell on it's face....rail pressure drops below 20k.
2) Malcolm never removed the Smarty de-fueling function (he didn't know my my truck de-fueles badly) or the torque management which would help with the run.
3) The wastegate opens a bit early
I think there is another 20-50hp waiting for a patient tuner.
Looking forward to BD!
Thread Starter
Registered User
Joined: Jan 2007
Posts: 685
Likes: 0
From: Home of the Beaver
Hey Ontun,
Trust me....there is more power waiting for you!
Malcolm dynod my Flux 2.5 setup today and he says we just missed 750Hp. I will post the graph tonight.
The funny thing is there is a bit more power to be had!
Here's a few items of note
1) I'm running the smaller Fass pump and it fell on it's face....rail pressure drops below 20k.
2) Malcolm never removed the Smarty de-fueling function (he didn't know my my truck de-fueles badly) or the torque management which would help with the run.
3) The wastegate opens a bit early
I think there is another 20-50hp waiting for a patient tuner.
Looking forward to BD!
Trust me....there is more power waiting for you!
Malcolm dynod my Flux 2.5 setup today and he says we just missed 750Hp. I will post the graph tonight.
The funny thing is there is a bit more power to be had!
Here's a few items of note
1) I'm running the smaller Fass pump and it fell on it's face....rail pressure drops below 20k.
2) Malcolm never removed the Smarty de-fueling function (he didn't know my my truck de-fueles badly) or the torque management which would help with the run.
3) The wastegate opens a bit early
I think there is another 20-50hp waiting for a patient tuner.
Looking forward to BD!
I think Malcolms dyno is going to read different than a mustang. BD is a tough drum, traction or not.
It should be interesting, one thing for sure it will be good meeting everyone.
Registered User
Joined: Dec 2003
Posts: 5,540
Likes: 0
From: Boise, Idaho
BTW...the towing comment...side note.
I too have GREAT joy towing with my truck at ~625-650 hp...all day any weight. The RPMS really have to be at 2k anyways to move enough air to keep that much power cool. It is really just a factor of coolant temps at this point for me. Where can I get a bigger radiator! LOL.
I too have GREAT joy towing with my truck at ~625-650 hp...all day any weight. The RPMS really have to be at 2k anyways to move enough air to keep that much power cool. It is really just a factor of coolant temps at this point for me. Where can I get a bigger radiator! LOL.
Thread
Thread Starter
Forum
Replies
Last Post
jaybone
3rd Gen Engine and Drivetrain -> 2003-2007
11
Oct 13, 2006 08:07 PM
Thenewguy
3rd Generation Ram - Non Drivetrain - All Years
2
Sep 6, 2006 12:26 PM
bigwheels94
3rd Gen High Performance and Accessories (5.9L Only)
17
Apr 6, 2006 09:48 PM
