anyone have a dyno run with one . EZ in number 6 setting no other mods to engine. like to see a real time run no advertized crap

 

Not with an EZ, but an Edge hot. 530 for HP, 800 or so for tq. Air intake, exhaust, fuel pump. Early 04? Mine is an 04.5...

 

not sure if 04 or 04.5 and just know he has 6 settings and had to sign a waiver do get number 6. thanks

 

It's a 2004 Juice w/ Attitude CTS.

 

You'll see close to 500 hp.

 

Good. They forgot to unlock #6 though unless I missed the code somewhere in the box.

 

Thought that was an additional charge.

 

http://edgeproductsracing.com/hotunlock.aspx

 

I sent the form in before they shipped the CTS. Should be simple to clear it up Monday afternoon.

Looks like they changed the cold engine configuration. With the old Attitude it would come in by stages @ 120F, 140F, then full at 160F. Now the defuel indicator is on to 170F.

FWIW,
The CTS module takes what feels like 15sec to power up to the main gauge screen. Would have thought the dodge OBD codes would be stored in nonvolatile memory, but it detects & reads them every time so far.

Overall I think it's a big step up from the older unit (2005 ver1.0) I had.

 

I lied about the 500... I just looked at the dyno sheet, 435/877 is what I ran...

 

305/555 + a claimed 150/350 boost is close when you figure drivetrain loses etc.