18"X9" with 4.5 backspacing will it work?
Registered User
Joined: May 2007
Posts: 277
Likes: 0
From: Bowling Green KY
Im running Moto Metal 951's with 285/65/18 Nitto Dune Grapplers with no leveling kit on my 03 4x4 and have never experienced any type of rubbing. Going off road or sharp turns my tires have never rubbed. I have purchased a leveling kit but havent installed it yet due to the lack of free time 
With a 35" tire I would expect rubbing even with a leveling kit and using 4.5 bs of wheels. I wish I had a good pic for ya but I dont, the wheels do stick out a little further than stock but I get compliments all the time. Id also like to thank 06ctd for the moto's.
With a 35" tire I would expect rubbing even with a leveling kit and using 4.5 bs of wheels. I wish I had a good pic for ya but I dont, the wheels do stick out a little further than stock but I get compliments all the time. Id also like to thank 06ctd for the moto's.
Registered User
Joined: Feb 2007
Posts: 1,126
Likes: 0
Im running Moto Metal 951's with 285/65/18 Nitto Dune Grapplers with no leveling kit on my 03 4x4 and have never experienced any type of rubbing. Going off road or sharp turns my tires have never rubbed. I have purchased a leveling kit but havent installed it yet due to the lack of free time
With a 35" tire I would expect rubbing even with a leveling kit and using 4.5 bs of wheels. I wish I had a good pic for ya but I dont, the wheels do stick out a little further than stock but I get compliments all the time. Id also like to thank 06ctd for the moto's.
With a 35" tire I would expect rubbing even with a leveling kit and using 4.5 bs of wheels. I wish I had a good pic for ya but I dont, the wheels do stick out a little further than stock but I get compliments all the time. Id also like to thank 06ctd for the moto's.
Registered User
Joined: May 2007
Posts: 277
Likes: 0
From: Bowling Green KY
Yep, he should have no issues at all. With 285/65/18's you can get by easily with no leveling kit. When I was tire shopping I considered the BFG's and Nittos. I went with the Dune grapplers and one of my friends bought the Terra Grapplers and my dune grapplers have gotten alot better tread life. Nitto now has the Dura Grappler out in some 18 in sizes if you would want to go with a highway tire.
Registered User
Joined: May 2007
Posts: 277
Likes: 0
From: Bowling Green KY
This is the only pic ive got right now, I just took my wheels and put the stockers back on because I was making some long interstate trips or I would snap some quick pics.
Dont mind the psd in the pic...lol
Dont mind the psd in the pic...lol
Registered User
Joined: Sep 2007
Posts: 2,372
Likes: 1
Wow..... that's unusual. Not saying you don't know what you are talking about because I'm sure you do. I couldn't get 33" Nitto's on Moto Metal 951's to fit even with a leveling kit and not have rubbing. It took 5" and then I had to go up to a 35" tall tire and it barely missed rubbing then. I guess some trucks are just different for some reasons. Who knows.... 
That's right the ATS flares would look a little silly with narrow wheels/tires, but if he runs the wheel with 5.25" backspacing on a 12.5" wide tire or so, it would look fine in my opinion. My 9" wide wheels have 5" of backspacing and the tires sit level with the flares (if not just a hair outside of them) and it looks great.
That's right the ATS flares would look a little silly with narrow wheels/tires, but if he runs the wheel with 5.25" backspacing on a 12.5" wide tire or so, it would look fine in my opinion. My 9" wide wheels have 5" of backspacing and the tires sit level with the flares (if not just a hair outside of them) and it looks great.
) when you try to run a 35 on that same wheel, with less than 6" of lift. i wasn't even close to making it work with 3 1/2" of lift. with a 17x8.5 wheel, with 5" b/s, i get no rubbing and the ats flares line up almost perfectly with the tires.
Registered User
Joined: Feb 2007
Posts: 1,126
Likes: 0
from most of my buddies with 3rd gens, i've found most of them were able to fit 33's on wheels with 4.5" b/s with no rubbing. the issues usually start (not that i know this from personal experience or anything ) when you try to run a 35 on that same wheel, with less than 6" of lift. i wasn't even close to making it work with 3 1/2" of lift. with a 17x8.5 wheel, with 5" b/s, i get no rubbing and the ats flares line up almost perfectly with the tires.
) when you try to run a 35 on that same wheel, with less than 6" of lift. i wasn't even close to making it work with 3 1/2" of lift. with a 17x8.5 wheel, with 5" b/s, i get no rubbing and the ats flares line up almost perfectly with the tires. 
Thread
Thread Starter
Forum
Replies
Last Post
Redneck-Express
3rd Gen High Performance and Accessories (5.9L Only)
7
May 1, 2009 12:45 PM
Treangen
3rd Gen High Performance and Accessories (5.9L Only)
6
Sep 30, 2008 11:31 AM
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
Oct 11, 2007 04:20 PM
06CTDforAU
3rd Gen High Performance and Accessories (5.9L Only)
7
Sep 6, 2007 07:41 AM
goldberg007
3rd Gen High Performance and Accessories (6.7L Only)
10
Jul 30, 2007 04:33 PM