Dodge Diesel - Diesel Truck Resource Forums

3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

04.7 600 boost *have to drill" correct?

   
Old Nov 12, 2004 | 08:11 PM
Share
  #1  
ckennedy's Avatar
ckennedy
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 415
Likes: 0
04.7 600 boost *have to drill" correct?
please tell me THAT the correct way for the 600 with a inner cooler is you have to tap/drill the intake!! correct?? you can not replace a bolt like the older engines!!
Reply
0
Old Nov 12, 2004 | 08:50 PM
Share
  #2  
Dodgezilla's Avatar
Dodgezilla
Registered User
 
Joined: Aug 2002
Posts: 8,803
Likes: 0
From: Northern Virginia
I have a boost bolt on my 03. I can't imagine that it has changed in two years....
Reply
0
Old Nov 12, 2004 | 09:30 PM
Share
  #3  
gsdog1's Avatar
gsdog1
Registered User
 
Joined: Sep 2003
Posts: 746
Likes: 0
From: USA
Not sure what an 04.7 is....but if it is the same as my 04.5 the boost bolt works just fine.

Matt
Reply
0
Old Nov 12, 2004 | 09:49 PM
Share
  #4  
PThree's Avatar
PThree
Banned
 
Joined: Sep 2004
Posts: 156
Likes: 0
From: IL
please post picture of this boost bolt location and what it is, i normally just used map sensors with juice on my fords
Reply
0
Old Nov 12, 2004 | 10:10 PM
Share
  #5  
OOPS's Avatar
OOPS
Registered User
 
Joined: Aug 2004
Posts: 613
Likes: 0
From: Roseville, CA
I did not like the size of the boost bolt, to much meat gone on that small of a bolt for my taste. So I drilled and tapped . See pictures in my members photos!!
Reply
0
Old Nov 12, 2004 | 11:56 PM
Share
  #6  
RamWheelsBy4's Avatar
RamWheelsBy4
Registered User
 
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
Piers boost bolt worked fine on my 325/600. Take a look.

http://dodgetruckworld.tenmagazines....ude/160135.jpg
Reply
0
Old Nov 13, 2004 | 07:30 AM
Share
  #7  
nickleinonen's Avatar
nickleinonen
Registered User
 
Joined: Mar 2004
Posts: 1,271
Likes: 0
From: markham, ontario, canada
i drilled & tapped my intake horn for my boost piping on my 04. took the whole intake horn off to do the work... much easier than on the truck. and it was free and quicker than waiting for a boost bolt
Reply
0

Trending Topics

Old Nov 13, 2004 | 05:41 PM
Share
  #8  
TUGUM's Avatar
TUGUM
Registered User
 
Joined: Sep 2004
Posts: 67
Likes: 0
From: JACKSONVILLE,FL BETWEEN HELL&HIGHWATER
geno's boost bolt works fine on mine .

\
Reply
0
Old Nov 15, 2004 | 12:27 AM
Share
  #9  
BigBlue's Avatar
BigBlue
Banned
 
Joined: Feb 2002
Posts: 0
Likes: 0
I used an plug in my block for mine on my 01. Works great.
Reply
0
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
90 Degree drill to drill or exhaust collector ??????
Brian08Q35004x4
3rd Gen Engine and Drivetrain -> 2007 and up
5
Feb 1, 2011 04:37 PM
Drill Here. Drill Now. Pay Less.
mega_man
Fuels / BioDiesel / Diesel Prices
7
May 29, 2008 03:40 PM
""ONLINE"" and ""OFFLINE"" status
PEAKSTRYDE
Suggestions, Comments and Site Questions
1
Oct 11, 2007 04:20 PM
What is drill bit size "R"?
finndogg54
3rd Gen High Performance and Accessories (5.9L Only)
12
Sep 17, 2007 11:12 AM
From TDR some "600" orders on "BG" - restrictions - till march
MedicShawn
3rd Generation Ram - Non Drivetrain - All Years
7
Feb 14, 2004 09:47 PM
Back to Subforum
3rd Gen High Performance and Accessories (5.9L Only)
View Next Unread
Genos garage and straightpipe..


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -5. The time now is 12:50 AM.