3rd Gen Engine and Drivetrain -> 2007 and up 6.7 liter Engine and Drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Have you seen this.. EDGE for 6.7 780LbsTQ

Thread Tools
 
Search this Thread
 
Old May 12, 2007 | 12:47 AM
  #1  
DodgeDemon's Avatar
Thread Starter
Banned
 
Joined: Apr 2007
Posts: 128
Likes: 0
Have you seen this.. EDGE for 6.7 780LbsTQ

Have you seen this.... SORRY if this is a repost!

http://www.youtube.com/watch?v=DFoMAKIszzw&NR=1
Reply
Old May 12, 2007 | 08:10 AM
  #2  
TSG400's Avatar
Registered User
 
Joined: Apr 2007
Posts: 6
Likes: 0
From: Brownsville/South Padre island, TX
Maybe I just cant see it very well, but that didnt look like the new 6.7 platform. Still looked like the 5.9
Reply
Old May 12, 2007 | 08:34 AM
  #3  
mikmaze's Avatar
Banned
 
Joined: Sep 2004
Posts: 3,502
Likes: 0
From: Cedar Grove, New Jersey
pretty sure that was the 6.7, they had the top shroud off the motor that covers the egr crud, and you could see a brozed over recirc pipe on the right/ drivers side of the motor, just guessing that is what I saw.
Reply
Old May 12, 2007 | 08:36 AM
  #4  
graphitecumnz's Avatar
Registered User
 
Joined: Mar 2004
Posts: 1,385
Likes: 0
From: Wichita, Kansas
Originally Posted by TSG400
Maybe I just cant see it very well, but that didnt look like the new 6.7 platform. Still looked like the 5.9
Look for the EGR tube at about 13 seconds into the video...
Reply
Old May 12, 2007 | 09:28 AM
  #5  
DodgeDemon's Avatar
Thread Starter
Banned
 
Joined: Apr 2007
Posts: 128
Likes: 0
Originally Posted by TSG400
Maybe I just cant see it very well, but that didnt look like the new 6.7 platform. Still looked like the 5.9
FOR SURE 6.7, I looked at it about five times before I posted, (I) wanted to make sure !!!!
Reply
Old May 12, 2007 | 09:28 AM
  #6  
coolslice's Avatar
Registered User
 
Joined: May 2004
Posts: 577
Likes: 0
From: Lexington, KY
It has the 68rfe also, you can tell by the dash, it only goes to "D".
Reply
Old May 12, 2007 | 09:50 AM
  #7  
truckjunkie's Avatar
Registered User
 
Joined: Aug 2004
Posts: 664
Likes: 0
From: St. Louis Metro Area, MO
So where was the smoke? Was there none, or did I miss something?

ON EDIT- I missed the exhaust evac tube the first time I saw it - sorry.
Reply
Old May 12, 2007 | 10:23 AM
  #8  
rstone's Avatar
Registered User
 
Joined: Oct 2006
Posts: 490
Likes: 0
From: College Station Texas
IT was a 6.7 for sure. You could tell by the intake manifold and egr stuff on it I think they took all the covers off.
Reply
Old May 12, 2007 | 09:56 PM
  #9  
w.tx iceman's Avatar
Registered User
 
Joined: Sep 2004
Posts: 533
Likes: 0
From: big spring tx.
Originally Posted by truckjunkie
So where was the smoke? Was there none, or did I miss something?

ON EDIT- I missed the exhaust evac tube the first time I saw it - sorry.

The way the 6.7 builds boost they are probably running fuel on the ragged edge( no pun intended) to save the dpf
Reply
Old May 13, 2007 | 09:16 PM
  #10  
haloman's Avatar
Chapter President
 
Joined: May 2002
Posts: 3,529
Likes: 0
I want to see a burnout or a boosted launch or something a "dyno vid" really doesnt tell ya much about their new chip.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Original Junior
2nd Gen. Dodge Ram - No Drivetrain
16
Oct 3, 2004 02:37 PM
Rusty69
Other
2
Mar 10, 2004 06:04 PM
pcabe5
Other
29
Sep 17, 2003 06:10 PM
chuck3
Other
5
Nov 20, 2002 09:46 AM




All times are GMT -5. The time now is 09:56 AM.