Guys shoot me a picture or location of your air bag air valve locations. I don't want to route them back to the bumper as they will most likeley get torn off. I like the fuel door location but there is not much room in there for the air chuck.

 

I've seen them put in the wheel well for easy install and access.

 

Ahh, Just drill a hole in the side of the box. haha

 

Put mine near the left license plate light. No problesms

 

Mine are in the license plate light plastic, routed up thru the frame.. Absolutely no way it can get ripped off.

 

Mine are in the bottom holes of my license plate.

 

Just installed mine yesterday and I put them in the wheel well .My truck had the hole in the seam by the wheel so didn't have to drill at all. It seems to be out of the way and easily accessed, we'll see. I did put a small loop in the line.

 

I put mine on the plate for the hitch, don't use them now though, the AirLift wireless setup is slick.

 

Mine are at the back end of the bed, under the tail gate in pre-punched
holes. I figured they were engineered for that purpose. Just another perk from Dodge.

BCD
08 2500 stock except for the new turbo, air bags and a vented tailgate.

 

Mine have been there for a couple years. I drive my truck through all sorts of crap while hunting and camping and have never had an issue.

Its a perfect spot IMO. A short run of air line,the holes are already there,and they're pretty well tucked up out of the way.