When removing and replacing the injectors, should you use new connectors and lines?
Thread Starter
Administrator/Jarhead
Joined: Jun 2006
Posts: 14,999
Likes: 33
From: Jonesborough, TN
When removing and replacing the injectors, should you use new connectors and lines?
I'm sending my injectors off to be checked (I'm sure one is hung open). Should I buy new connector tubes and fuel rail lines?
Registered User
Joined: Feb 2006
Posts: 1,012
Likes: 2
From: Auburn, WA
No wouldn't waste the $ on lines except maybe #4 if it is the original one.
Replacing the crossover tubes is a 50/50 reccomendation based on who I talked to before doing mine. I reused mine but per your pics, I'd replace.
BTW if you're just buying new injectors, I had great service from TC diesel and they had the best price on Dragonfly 60hp sticks. Better than direct from Industrial.
Replacing the crossover tubes is a 50/50 reccomendation based on who I talked to before doing mine. I reused mine but per your pics, I'd replace.
BTW if you're just buying new injectors, I had great service from TC diesel and they had the best price on Dragonfly 60hp sticks. Better than direct from Industrial.
One cracked nozzle, all of them were out of tolerance.
Thread
Thread Starter
Forum
Replies
Last Post
Svenne
3rd Generation Ram - Non Drivetrain - All Years
3
Aug 26, 2015 06:52 PM
steelblitzkrieg
3rd Generation Ram - Non Drivetrain - All Years
2
Jun 24, 2011 12:01 PM
lastcall190
3rd Gen High Performance and Accessories (5.9L Only)
2
Jun 23, 2011 02:27 PM
Gizzard
3rd Generation Ram - Non Drivetrain - All Years
11
Aug 27, 2010 09:25 PM
b.lee
12 Valve Engine and Drivetrain
8
Nov 30, 2009 12:38 AM
