what has to be changed in the V/B to fix 2-3 shift
my truck just shifts bad going from 2-3 gear.It acts like its unsure of what gear to go into with light throttle.I know all the guys with the after market valve bodys claim they have one that fixes the problem.it cant be that big of a deal to fix this problem.I hope Im wrong
.arent most of them loaded with a trans go shift kit and sum electric parts.
Richard
.arent most of them loaded with a trans go shift kit and sum electric parts.Richard
The 2-3 problem could just be misadjusted front band also.
The Transgo shift kit, billet front servo cover, and billet band strut can all be put in without removing the trans, need to remove the VB of course. That will fix 90% of the shuttle shift problems and several of the shortcomings.
Might as well do the gov solenoid and transducer as a precaution.
The Transgo shift kit, billet front servo cover, and billet band strut can all be put in without removing the trans, need to remove the VB of course. That will fix 90% of the shuttle shift problems and several of the shortcomings.
Might as well do the gov solenoid and transducer as a precaution.
Thread
Thread Starter
Forum
Replies
Last Post
GUMP
24 Valve Engine and Drivetrain
3
May 26, 2008 08:26 PM
rich
3rd Gen Engine and Drivetrain -> 2003-2007
22
Mar 30, 2005 04:37 PM
Truck96
3rd Gen Engine and Drivetrain -> 2003-2007
2
Oct 5, 2004 12:09 PM
rich
24 Valve Engine and Drivetrain
4
Jun 27, 2003 01:08 PM




