Hello i have done a lot of searching and found a lot out. Maybe you guys can just help me get right to the point. I have a 2006 2500 mega cab and i want to make it a dually. I have the fenders and all the wheels but what do i need to get for the wheels to get the on. I see spacers that i can get but what size do i get for the front? and whats the best thing to do in the back

Thanks
Danny

 

Anyone?? lol

 

the 4x4 dually's come with an adapter. believe the drw axle is wider then the srw. you could try arrow the make an adapter kit . some guys have mentioned them here do a search for it

 

The factory DRW axle is 3 inches wider than the SRW axle. So you'd need atleast 1.5" spacers on each side of the rear axle. On the front you can get a set of factory Dodge spacers from a 4wd dually, or buy some after market. I've seen them on ebay for around $150. You can also try this place.

http://www.chromewheel.com/adaptors.htm

As sugested already, try Arrow also.

 

I installed an ArrowCraft kit on my 02 2500 in 2005 and have had no issues at all. Hauled a Lance 1010 in the bed for a year and have been towing a 11K 5th wheel since then. Good folks to work with as well. Family run business, not a Corruptoration.

www.arrowcraft.com