P0243 but I have boost fooler plugged in?
Registered User
Joined: Nov 2006
Posts: 8
Likes: 0
Coincidentally, I had this same issue arrive today. Im running an II Silver 62 w/ the fooler plugged in and at out of no where got this code. Ill try checking my resistance tomorrow and see if I need to get a new one.
Thread Starter
Registered User
Joined: Apr 2004
Posts: 3,241
Likes: 1
From: NW Indiana
Registered User
Joined: Nov 2006
Posts: 8
Likes: 0
Checked it with an OHM meter, didnt read anything.... just like an open. So, I went to radio shack, purchased 100ohm resistors (5 pack 99 cents). Got the II boost fooler, took the pins out (which are connected to the resistor); Cut took the old resistor out; soldered the new one..... works perfect again.
Im thinking a big water puddle I hit shot water up the plug. This time I wrapped it in electrical tape.
Im thinking a big water puddle I hit shot water up the plug. This time I wrapped it in electrical tape.
Thread Starter
Registered User
Joined: Apr 2004
Posts: 3,241
Likes: 1
From: NW Indiana
Checked it with an OHM meter, didnt read anything.... just like an open. So, I went to radio shack, purchased 100ohm resistors (5 pack 99 cents). Got the II boost fooler, took the pins out (which are connected to the resistor); Cut took the old resistor out; soldered the new one..... works perfect again.
Im thinking a big water puddle I hit shot water up the plug. This time I wrapped it in electrical tape.
Im thinking a big water puddle I hit shot water up the plug. This time I wrapped it in electrical tape.
Thanks for everyone's help...
Thread
Thread Starter
Forum
Replies
Last Post
031tun
3rd Gen Engine and Drivetrain -> 2003-2007
2
Dec 1, 2012 08:45 PM
Killdmycobra
3rd Gen High Performance and Accessories (5.9L Only)
8
Nov 12, 2010 05:15 PM
OldDodgeOwner
24 Valve Engine and Drivetrain
8
Sep 1, 2009 11:42 AM
upjeeper
3rd Gen Engine and Drivetrain -> 2003-2007
2
Jan 26, 2008 09:36 AM
Rollin' Smoke
3rd Gen High Performance and Accessories (5.9L Only)
23
Jun 26, 2007 09:04 PM