3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

No start missing relay identafication

Old Jul 13, 2008 | 02:03 PM
  #1  
raybob_99's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 45
Likes: 0
From: Arkansas
No start missing relay identafication

There is a relay that is right above the brake master cylinder, has 2 wires one goes behind the fule filter housing and one goes under the cab. Purchased this truck as a theft, cant get lift pump to prime up. Is that what this relay is for? Can get pic's if anyone isn't following me. Thanks for help.
Reply
Old Jul 13, 2008 | 09:31 PM
  #2  
BigIron70's Avatar
Cummins Guru
15 Year Member
Liked
 
Joined: Feb 2008
Posts: 4,191
Likes: 65
From: Sunny Southern California Land of Fruits and Nuts
Lift pump gets power from the ECM. If your pump is mounted on fuel filter housing it is most likely bad. New retrofit fuel pumps are available for replacement. If under 100k miles covered under warranty.
Reply
Old Jul 13, 2008 | 09:36 PM
  #3  
raybob_99's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 45
Likes: 0
From: Arkansas
2004.5

I should have listed what model truck i have, mine is a 2004.5, i don't see a lift pump on filter housing.
Reply
Old Jul 13, 2008 | 10:19 PM
  #4  
kruisecontrol's Avatar
Registered User
 
Joined: Jan 2008
Posts: 15
Likes: 0
From: riverside ,ca
the pump is in the tank , the relay for the lift pump is from the small relays column in the power didtribution ceter underhood its the 4th from top to bottom right column left to fuse # 48

Reply
Old Jul 13, 2008 | 11:06 PM
  #5  
torquefan's Avatar
Registered User
 
Joined: Sep 2003
Posts: 4,449
Likes: 47
From: Calgary, Alberta
It sounds to me like this truck originally came with the lift pump on the filter housing, then later it was retrofitted to the in-tank pump. The relay and wiring you see are part of the retrofit.
Reply
Old Aug 18, 2008 | 01:31 PM
  #6  
raybob_99's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 45
Likes: 0
From: Arkansas
pump

Can i remount a lift pump on the filter housing? Even if it has been retrofitted with an intank pump? I think this is what has happened because mopar doesn't show anywiring for the relay. Let me know. Thanks
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
hodgepodge
HELP!
1
Apr 13, 2007 06:30 AM
forane2001
3rd Gen Engine and Drivetrain -> 2003-2007
21
Oct 6, 2006 01:13 PM
torqueman
3rd Gen Engine and Drivetrain -> 2003-2007
11
Mar 24, 2006 05:21 PM
mazeppa
12 Valve Engine and Drivetrain
3
Feb 10, 2004 06:54 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:40 AM.