Fuel rail pressure problem
Thread Starter
Registered User
Joined: Sep 2006
Posts: 2
Likes: 0
Fuel rail pressure problem
I have a problem with Dodge Ram 2500 Cummings diesel 2003.
Sometime I have to start very long time and then it runs great.
But now I cant get engine running and rail pressure is very low about 1000 psi. The rail pressure should be around 5500-6000 psi.
Do any one have problem like that.
Regards Jon
Sometime I have to start very long time and then it runs great.
But now I cant get engine running and rail pressure is very low about 1000 psi. The rail pressure should be around 5500-6000 psi.
Do any one have problem like that.
Regards Jon
Registered User
Joined: Jul 2005
Posts: 2,953
Likes: 0
From: Belgrade, Montana
I would look a little further upstream at the lift pump. It supplies the high pressure pump. If it isn't getting fuel from the lift pump then there is no way the pressure pump can make enough rail pressure to run the engine. Since the lift pumps on these are notrious piles I would look there first. JMO.
Thread
Thread Starter
Forum
Replies
Last Post
rebel102285
3rd Gen High Performance and Accessories (5.9L Only)
6
Jun 12, 2009 11:57 AM
5.9Excursion
3rd Gen High Performance and Accessories (5.9L Only)
3
Mar 13, 2008 10:56 AM
subspd
3rd Gen High Performance and Accessories (5.9L Only)
8
Dec 24, 2006 02:01 PM
rjm022
3rd Gen High Performance and Accessories (5.9L Only)
6
Dec 14, 2006 05:20 AM
mtl0727
3rd Gen High Performance and Accessories (5.9L Only)
1
Nov 5, 2005 06:47 PM