Fuel Pressure Gauge Question / FCA
Thread Starter
Registered User
Joined: Nov 2002
Posts: 166
Likes: 0
From: Houston, Texas (Willowbrook area)
Fuel Pressure Gauge Question / FCA
Are folks putting a gauge on the high-pressure side of the fuel system as well as the low (lift pump) pressure side? Kinda dicey ain't it ?
One other thing.....I called the Dodge ******* and asked about a Fuel Control Actuator (FCA) for a 2003 CTD.........and he said he doesn't sell it separately, only with the CP3 pump.......is this accurate? How abouta Cummins part number..???????? Thanks....--Curtis
One other thing.....I called the Dodge ******* and asked about a Fuel Control Actuator (FCA) for a 2003 CTD.........and he said he doesn't sell it separately, only with the CP3 pump.......is this accurate? How abouta Cummins part number..???????? Thanks....--Curtis
DTR's 'Go to Guy'
Joined: Jan 2007
Posts: 3,811
Likes: 4
From: Indiana
Oh, and most people are putting an electronic rail pressure guage on. I don't know if a manual guage will read very accurate. There is a lot of pressure and it goes up and down very quick. Most of the electronic guages tap into the factory rail pressure sensor and are quite easy to install. I'd look at either the Quadzilla Commander or the Quadzilla Rail Pressure Guage.
Thread
Thread Starter
Forum
Replies
Last Post
5.9Excursion
3rd Gen High Performance and Accessories (5.9L Only)
55
Feb 26, 2020 09:55 PM
steve2216
3rd Gen Engine and Drivetrain -> 2003-2007
14
Oct 30, 2015 05:59 AM
moparman13045
3rd Gen Engine and Drivetrain -> 2003-2007
67
Oct 29, 2007 09:29 PM
draskobnsf
3rd Gen High Performance and Accessories (5.9L Only)
17
May 29, 2007 08:29 PM
