Has anyone run these XRF ball joints? I've found them on eBay and they are awful cheap. Just wanting some feedback before I buy anything

 

I've had them on for @ 70k with no issues. The right side is still so tight that I have to 'hang the tire' on that side inorder to grease top and bottom. Other than that all is well.

Jim

 

I've only put about 5k on mine since last October, and those, coupled with the '08 steering upgrade made a huge difference on my truck. The joints are still very tight. I'd buy them again if I had to.

Not sure about your price you found but most folks that use them here get them from TireClub.com and they're just a little over $200 for all 4.

 

I found them on eBay through tireclub for 235 with free shipping. They are actually about 10 higher if you go directly to their website

 

Im runnin xrf lowers coupled with carli uppers and over 100k and still tight as the day i installed them!

 

I guess everything is going up in price. From last October until now that's a $10 increase over what I gave for them. It may not seem like much to some, but I'm on a strict budget these days with $4/gal #2 and rising week to week.

 

You guys know were I could find the boot for the lowers? Mines cracked with only 1 yr on them.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

 

I myself have installed them in me 01 still going but at my freinds shop he has at least 7 sets fail with low miles on them and it is impossable to get any warrenty out of xrf so he is switching over to spicer where he nows warrenty is better