3rd Gen Engine and Drivetrain -> 2003-2007 5.9 liter Engine and drivetrain discussion only. PLEASE, NO HIGH PERFORMANCE DISCUSSION!

Edge Milage Max or Quadzilla Max Milage

Old Oct 29, 2007 | 11:43 AM
  #1  
Dually Driver's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 13
Likes: 0
From: AZ
Edge Milage Max or Quadzilla Max Milage

Anybody out there tested both of these products and if so which one would you recommend ???
Reply
Old Nov 11, 2007 | 07:18 PM
  #2  
STATELINE's Avatar
Registered User
 
Joined: Apr 2005
Posts: 366
Likes: 0
From: SW PA
wondering about these myself anybody tried either one???
Reply
Old Nov 12, 2007 | 01:00 AM
  #3  
Cobra909's Avatar
Registered User
 
Joined: May 2007
Posts: 41
Likes: 0
Was up in FW 2 weeks ago and went by Quad. Swapped my old XZT for the new module with Max Mileage loaded on #1. Got 11.53 mpg pulling my 10K 5er back home...but, this was constantly changing speeds between 35-50 mph due to pea soup fog for the last 100 miles.

Unloaded, (just comparing fuel gauge readings) made usual drive to work and it "seems" like I may have picked up 50 miles per 1/2 tank. Will be able to post some HC #s in about 8 days.
Reply
Old Nov 12, 2007 | 03:47 AM
  #4  
STATELINE's Avatar
Registered User
 
Joined: Apr 2005
Posts: 366
Likes: 0
From: SW PA
909, sounds promising so far, please keep us informed
Reply
Old Nov 12, 2007 | 08:29 AM
  #5  
Hunter11's Avatar
Registered User
 
Joined: Jun 2004
Posts: 696
Likes: 0
From: Austin, Texas
I picked up 1.5 mpg with the MM tune loaded on my X2 XZT. That is running empty on my daily commute. That was hand calculated over 2 tanks of fuel. I am going to run the MM tune on our next trip with the trailer just to see if I see any gain while towing.
Reply
Old Nov 12, 2007 | 10:25 AM
  #6  
bluebull's Avatar
Banned
 
Joined: Apr 2004
Posts: 1,410
Likes: 0
From: Where hell freezes over.
Could someone tell me where the MMM connects and where the Edge MM connects?
EDIT:: Also if mount in cab or under hood?

Thanks,
Reply
Old Nov 12, 2007 | 07:51 PM
  #7  
Cobra909's Avatar
Registered User
 
Joined: May 2007
Posts: 41
Likes: 0
The Quad module mounts under the dash. Go to www.quadzillapower.com and you can download the .pdf for install instructions. Highly recommend the Commander too; allows switching levels and great monitoring. IMO.

Hey Keith!
Reply
Old Nov 12, 2007 | 08:24 PM
  #8  
supersonictoys's Avatar
Registered User
 
Joined: Jun 2006
Posts: 370
Likes: 1
the quadzilla mileage module ads no fuel pressure or boost fooling and only adjusts injection timing. at 20psi boost or above the box reverts to stock so if you are running hard or towing very heavy up hill you wont see any improvement. if you keep the boost under 20psi it should help a bit. seems like they advertise 12%? I dont have the MM yet but have the commander sitting here ready to be installed.
Reply
Old Nov 13, 2007 | 08:59 AM
  #9  
HOV's Avatar
HOV
Registered User
 
Joined: Sep 2006
Posts: 798
Likes: 0
From: Northern VA
Originally Posted by bluebull
Could someone tell me where the MMM connects and where the Edge MM connects?
EDIT:: Also if mount in cab or under hood?

Thanks,
The MM3 connects inline to the fuel pressure sensor and the MAP sensor.
Reply
Old Nov 13, 2007 | 09:47 AM
  #10  
surfram's Avatar
Registered User
 
Joined: Jan 2004
Posts: 1,125
Likes: 1
From: Delaware
Are these mileage boxes essentially an edge EZ or edge juice with only the level 1 setting available? Does anyone know how much rail pressure the edge mileagemax box uses compared to an edge EZ or edge juice on a 2004 305/555?
Reply
Old Nov 13, 2007 | 09:51 AM
  #11  
Move'n Up's Avatar
Registered User
 
Joined: Nov 2006
Posts: 27
Likes: 0
From: Carrollton, TX
Originally Posted by supersonictoys
the quadzilla mileage module ads no fuel pressure or boost fooling and only adjusts injection timing. at 20psi boost or above the box reverts to stock so if you are running hard or towing very heavy up hill you wont see any improvement. if you keep the boost under 20psi it should help a bit. seems like they advertise 12%? I dont have the MM yet but have the commander sitting here ready to be installed.
FYI - The MM3 does do Boost Fooling
Reply
Old Nov 13, 2007 | 10:29 AM
  #12  
supersonictoys's Avatar
Registered User
 
Joined: Jun 2006
Posts: 370
Likes: 1
been on the phone with the techs at quadzilla and asked them specifically about this box and was told by chris in the tech department that the MM DOES NOT ADD FUEL OR BOOST FOOLING. only changes timing. you can ask them yourself by calling and ask for the tech department at 888-842-6572. now, this box is upgradeable and you can download more powerful programs that will add both fuel and boost if you like but it doesnt do that stock. its just for fuel mileage not power.
"qoute from quadzilla web site"
The max mileage module will not put your engine or powertrain at any risk. This product actually lowers egt's. It does not raise boost over stock levels and does not add any fuel to your engine. Because of the way this increased efficiency works , you will gain noticeable performace while empty or towing. These perforamance gains will not affect the transmission under any circumstances!!
Reply
Old Nov 13, 2007 | 02:36 PM
  #13  
Adaminak's Avatar
Registered User
 
Joined: Nov 2007
Posts: 616
Likes: 2
From: Charleston, SC
Boost Fooling Update

To Clarify:

The Quad MMM does have boost-fooling with a (free) update from their website. As shipped, it does not have a boost-fooling function.

-Adam
Reply
Old Nov 13, 2007 | 09:10 PM
  #14  
supersonictoys's Avatar
Registered User
 
Joined: Jun 2006
Posts: 370
Likes: 1
just as I said, doesnt have it stock but can be modified
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cemt8
3rd Gen High Performance and Accessories (5.9L Only)
1
Sep 29, 2008 09:27 PM
sinawalli
3rd Gen Engine and Drivetrain -> 2003-2007
0
Jun 18, 2008 10:09 PM
fflarry
3rd Gen Engine and Drivetrain -> 2007 and up
18
Feb 22, 2008 05:57 PM
Billwie
3rd Gen High Performance and Accessories (5.9L Only)
6
Dec 15, 2007 01:04 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:10 AM.