I drove down to Dynatrac to pick up my kit and look things over. As I have said in other posts, Dynatrac is a 1st rate mfg co. It does much more than these kits. They sell these kits on a constant basis. I tried to get a deal but their price is pretty solid, I did save on the shipping. Yes their hubs are beasts for strength but I really don't wheel my truck hard so I went with the Warn's. They are eye catchers to other 4x4 owners. I could have gotten the EMS kit cheeper but glad I went with Dynatrac, I know they will be around as long as I will. Life is full of choices, choose wisely.

 

There is a group buy going on right now over on the www.dieselbombers.com forum for Dynatrac kit. You need to email the vendor for the price. I asked a few minutes ago but don't expect to have an answer until tomorrow.


http://www.dieselbombers.com/group-b...roup-buys.html

 

Roy...saw that as well and threw a PM out to see if I get a response. Last I checked a couple months ago the Dynatrac freespin stage 2 kit was about $2300...its going to have to be a heck of a discount if its going to beat the spyntec kit at $1550.

 

My understanding is it is only 10% off........

My bearings are still fine but I figure I'll do the swap before the spring as I need to do the ball joints and the universals anyways and I can sell my bearings on Ebay for about $150-$200 each.......That brings the price down to reasonable. The Spyntec kit is looking better all the time.

I was concerned that the Spyntec kit increased the front track and used different rotors. I've since found that this is not the case. Think I'll place my order this afternoon...........

I just ordered the XRF ball joints on Ebay for $213 including shipping......Best deal I could find.

 

Is anyone making a kit for the 3500 dulie?
R/T

 

I own the dynalocs, and I'm not happy with them. After only a few weeks they tarnished really bad and look horrible. I tried polishing them and clear coating them, but they tarnished under the clear coat. I spent an extra $300 on the Dynalocs when I should of just gone with the Warn setup.

 

Heres some pics of my dually w/ dynaloc hubs

And the arrowcraft spacers

 

None of the kits are speciafically for the Duallies. Like Spooled05 showed in the above pic you have to use some special front wheel adaptors from Arrowcraft. Those are what we use in our Dynatrac kits.

 

If any of you guys are in the market for this kit talk to George (Skyd Ram)
he'll hook you up!