I have a 3rd gen ATS exh manifold ...and i'm wondering if it will fit a 2nd gen..

anyone have any thoughts on that one?

thanks guys!

JAY

 

The Exhaust out let is to far to the rear, it should be closer to the middle for equal flow of exhaust. the #5 port is restricted on the OEM manifold, the ATS piece improves this. Find a third gen guy to buy it and get one that will fit yours.
Marv.

 

Im interested, PM me a price if you want to sell it. Wes

 

Marv--Thanks for the notes...

my buddy sold me the compound turbo setup off his 04 for a good deal....so i was planning on installing it on my 2nd gen...figuring i might be able to use the 3rd gen ATS manifold for this reason....

so i guess my question would be would it bolt up to the 2nd gen head...

if it won't work i guess trading a 3rd gen for a 2nd gen manifold would be the way to go... this piece was only used for 5k miles...light towing (snomobiles)

J

 

the manifold for all 3rd gen twins, is actually is a 2nd gen ats manifold. Identical. The manifold should work, but some chopping of the twins plumbing will have to be done to fit a 2nd gen

 

chopping...such as intercooler plumbing, etc? i take it's because of different placement of things?

J

 

I know for sure that the intake piping into the primary is different, air boxs are mounted in different spots, the rest of the piping, i dont know. Take a look at the twins on piers website, good pics of 2nd gen- 3rd gen set-ups

 

****....figured i might get a bit lucky...i suppose i will make the b-1/b-2 setup work somehow...lol


J