Do we need to retorque b series head bolts?
#1
Registered User
Thread Starter
Join Date: Nov 2007
Location: Alberta Canada
Posts: 2,028
Likes: 0
Received 0 Likes
on
0 Posts
Do we need to retorque b series head bolts?
after a rebuild or new engine install do we have to retorque our head bolts on 3rd gens? reason being on some engines ive done in the past you dont have to. they just allow you torque/turn method and call it good. i dont have a FSM so i dont know what cummins is calling for on the isb 24 valve.
Trending Topics
#8
Head studs need retorqued too!!!!
I was at a local engine builders shop last month and watched him torque a set of heads on a SBC.
He pulled then to 50, then 55, then 60, then 65, then 70. Eact time backing them off completely!!!!!
I was at a local engine builders shop last month and watched him torque a set of heads on a SBC.
He pulled then to 50, then 55, then 60, then 65, then 70. Eact time backing them off completely!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
KRB
1st Gen. Ram - All Topics
40
01-13-2013 11:06 PM