"Clank" shifting to Reverse or taking foot off accelerator
Thread Starter
Registered User
Joined: Jul 2010
Posts: 1
Likes: 0
"Clank" shifting to Reverse or taking foot off accelerator
Multiple sounds here....but when I shift the truck into reverse (2005 2500 RAM Automatic Trany) I heard a loud "CLANK" like dropping a hollow iron pipe onto the ground. None of the other gears, when shifting make this sound. Also seem to hear a similar "CLANK" when taking the foot off the accelerator. I can keep it from happening if I remove my foot slowly or slowly decelerate. Any thoughts??? U JOINT?
With age comes the cage
Joined: Jul 2007
Posts: 2,710
Likes: 3
From: The Gas Patch
Welcome to DTR..
Park it on the driveway in neutral with the parking brake on and get under there and check u-joints ect. How many miles on your truck?
Here is the thread on how to setup your sig-line:
https://www.dieseltruckresource.com/...e-t224847.html
Park it on the driveway in neutral with the parking brake on and get under there and check u-joints ect. How many miles on your truck?
Here is the thread on how to setup your sig-line:
https://www.dieseltruckresource.com/...e-t224847.html
Thread
Thread Starter
Forum
Replies
Last Post
Calgary
3rd Gen Engine and Drivetrain -> 2003-2007
4
Nov 21, 2014 02:10 PM
Mick-e
1st Gen. Ram - All Topics
11
Sep 4, 2012 06:18 PM
BigBlack'05
3rd Gen Engine and Drivetrain -> 2003-2007
1
Sep 2, 2011 07:05 AM
mrdrinksalil
3rd Gen High Performance and Accessories (5.9L Only)
14
Jul 2, 2009 01:47 PM
4WDXPRT
3rd Gen Engine and Drivetrain -> 2003-2007
7
Sep 8, 2004 06:43 PM