Boost at Idle? Help, Please
#1
Registered User
Thread Starter
Join Date: Jun 2002
Location: Lakewood, CO USA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Boost at Idle? Help, Please
Good morning, all. I wanted to ask the group a question about boost. A few weeks ago I installed an Edge CTS2 programmer, and have it set up on the dash to monitor the engine. I noticed right away that the boost gauge appears to read 3 pounds of boost at idle, which seems weird. The max boost is 25 pounds or less at full boil. I noticed last night, in 6th gear, coasting down a highway hill at 65mph, the boost was reading between 3 and 4 pounds. Could this be just the factory boost sensor being inaccurate, or could it really be boosting at idle?
Thoughts?
Thanks!
Thoughts?
Thanks!
#2
Registered User
Thread Starter
Join Date: Jun 2002
Location: Lakewood, CO USA
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
I think I got it sorted out - the boost is measured through the MAP, which accounts for atmospheric pressure. Should consider investing in the actual pressure sensor from Edge.
Thread
Thread Starter
Forum
Replies
Last Post
mattyfz450
3rd Gen Engine and Drivetrain -> 2003-2007
10
02-02-2009 10:40 AM
rootremblay
Performance and Accessories 2nd gen only
1
11-09-2008 10:59 AM
Dwitt0187
3rd Gen High Performance and Accessories (5.9L Only)
5
07-06-2007 06:22 PM