Any thoughts
07-03-2015, 02:42 PM
#1
Registered User
Thread Starter
Any thoughts
Ok I explained my waste gate issues in another thread
But here are my issues and work I have done.
I am getting a p0148 error and p1223 p1224 error truck was running terrible at start up and it look like you let off a smoke grenade at start up.
So I replaced all 6 injectors. Just injectors no feed tubes. Truck still a little rough off on idle and lets out white smoke. no where near as much though and clears up after a minute. Now while driving truck I get wait to start light and 10 chimes. No loss of power or anything. Put truck on snap on scan tool. sorry if I mix this up. But rail pressure is 6800-7000 and injector pressures are at 18k. I cant see any leaks along rail. No diesel smell around head. So what u think? Bad tube? leaking line or the FCA?
But here are my issues and work I have done.
I am getting a p0148 error and p1223 p1224 error truck was running terrible at start up and it look like you let off a smoke grenade at start up.
So I replaced all 6 injectors. Just injectors no feed tubes. Truck still a little rough off on idle and lets out white smoke. no where near as much though and clears up after a minute. Now while driving truck I get wait to start light and 10 chimes. No loss of power or anything. Put truck on snap on scan tool. sorry if I mix this up. But rail pressure is 6800-7000 and injector pressures are at 18k. I cant see any leaks along rail. No diesel smell around head. So what u think? Bad tube? leaking line or the FCA?
Thread
Thread Starter
Forum
Replies
Last Post
00 5.9 ctd
24 Valve Engine and Drivetrain
6
02-12-2006 08:58 PM
kdrfarms
1st Gen. Ram - All Topics
5
02-06-2006 11:20 AM
Patrick Campbell
Towing and Hauling / RV
2
09-07-2005 05:12 PM
triplenickel
3rd Gen High Performance and Accessories (5.9L Only)
6
01-17-2005 09:46 PM
JaMan
Performance and Accessories 2nd gen only
6
03-07-2004 11:08 PM