add on POWER for the 2003 cummins
Check the performance section and just go backwards a page at a time and you will find several posts to answer your question. I for one have experience with the EdgeEZ and all I can say is
You can also look at everybody's signature to see what they are running and PM them with questions. This is a great site but beware!
Once you start you can't stop!
You can also look at everybody's signature to see what they are running and PM them with questions. This is a great site but beware!
Once you start you can't stop!
Speaking of signature, fill yours out Bill so we know what ya got.
I’m still contemplating on which box I want to go with. TS RAMifier seems to be the most reliable HP for the money at this point, but you still have the TST PowermaxCR, Edge Juice, and a new one from Quadzilla that we assume will be way more powerful but have yet to hit the market. Well, in TST’s case, the PowermaxCR is on the market, just yet to be trouble free. I would take Dodgezilla's advice and start reading from the end of the "Performance" forum. You will find way more info than can be repeated in a single post. If you have patience, rumor is within a couple of months, there will be three awesome boxes on the market that will blow us away.
I’m still contemplating on which box I want to go with. TS RAMifier seems to be the most reliable HP for the money at this point, but you still have the TST PowermaxCR, Edge Juice, and a new one from Quadzilla that we assume will be way more powerful but have yet to hit the market. Well, in TST’s case, the PowermaxCR is on the market, just yet to be trouble free. I would take Dodgezilla's advice and start reading from the end of the "Performance" forum. You will find way more info than can be repeated in a single post. If you have patience, rumor is within a couple of months, there will be three awesome boxes on the market that will blow us away.
Thanks...
I am hearing from a few people that Van aaken's first box out for the 03 is getting good revs.70 hp/ 200lbs or so torque.
And they have a 3 position on due out this month at 120hp/ 318 lbs.
Banks seems like a nice one. Rail pressure bothers me w/ some of the others.
I am hearing from a few people that Van aaken's first box out for the 03 is getting good revs.70 hp/ 200lbs or so torque.
And they have a 3 position on due out this month at 120hp/ 318 lbs.
Banks seems like a nice one. Rail pressure bothers me w/ some of the others.
Originally posted by BILL DODGE2003
Thanks...
I am hearing from a few people that Van aaken's first box out for the 03 is getting good revs.70 hp/ 200lbs or so torque.
And they have a 3 position on due out this month at 120hp/ 318 lbs.
Banks seems like a nice one. Rail pressure bothers me w/ some of the others.
Thanks...
I am hearing from a few people that Van aaken's first box out for the 03 is getting good revs.70 hp/ 200lbs or so torque.
And they have a 3 position on due out this month at 120hp/ 318 lbs.
Banks seems like a nice one. Rail pressure bothers me w/ some of the others.
Thread
Thread Starter
Forum
Replies
Last Post
dodgemaniac
3rd Gen Engine and Drivetrain -> 2003-2007
7
Jun 12, 2007 08:21 AM
turbov6joe
3rd Gen Engine and Drivetrain -> 2003-2007
3
Feb 17, 2003 04:22 AM
pwabbott
3rd Generation Ram - Non Drivetrain - All Years
14
Dec 20, 2002 08:23 PM




