sound/heat deadening insulation
#1
sound/heat deadening insulation
All,
I am about to re-install the interior on my 1995 Dodge 2500 regular cab. I have a 5" straight pipe from the turbo back, and know that the "drone" and potential heat will drive me crazy! I made this a short bed, (8' to 6' bed) which makes the exhaust even closer to where the cab is.
Those that have done this before, I would like to know how many square feet do I need to do the floor wall to wall, and up the rear of the cab? There are so many thicknesses and sizes out there, I don't want to spend more than I have to.
I am about to re-install the interior on my 1995 Dodge 2500 regular cab. I have a 5" straight pipe from the turbo back, and know that the "drone" and potential heat will drive me crazy! I made this a short bed, (8' to 6' bed) which makes the exhaust even closer to where the cab is.
Those that have done this before, I would like to know how many square feet do I need to do the floor wall to wall, and up the rear of the cab? There are so many thicknesses and sizes out there, I don't want to spend more than I have to.
#2
Registered User
Search this one if you don't get any replies in this and performance/accessories. I seem to remember this being answered quite a few years back....
Thread
Thread Starter
Forum
Replies
Last Post
samiam4
1st Gen. Ram - All Topics
7
12-19-2012 12:08 PM
Red3quarter
2nd Gen. Dodge Ram - No Drivetrain
5
08-13-2007 09:34 PM
Cummins600
3rd Generation Ram - Non Drivetrain - All Years
18
04-06-2005 08:58 PM
DSLRammin
3rd Generation Ram - Non Drivetrain - All Years
23
02-08-2005 12:56 PM